Tuesday, July 14, 2015

Colloidal Silver for Burn Relief Beyond Belief

 Learn more about the healing qualities of colloidal silver at www.TheSilverEdge.com
Last week I published a short guest article on using colloidal silver for burns and sunburn, which included a do-it-yourself recipe for a colloidal silver sunburn lotion.

This week, we’ll take a look at some more of the profound anecdotal evidence for colloidal silver’s startling effectiveness as a pain reliever and healing agent for both sunburn and burns of all sorts…

Hi, Steve Barwick here, for The Silver Edge

Colloidal silver – the world’s most powerful, natural infection-fighting agent -- is known to be helpful for healing a wide variety of skin conditions, ranging from minor cuts and  scrapes to bug bites, acne and other skin eruptions, plus dandruff, MRSA boils, sunburn, and yes, even significant burns. 

In fact, many hospitals use a prescription cream called Silvadene (i.e., silver sulfadiazine) on burns, including on severe sunburn. 

My Personal Experience 
with Silver Sulfadiazine

I've only had one experience with silver sulfadiazine, and the stuff worked wonderfully for me.

After an all-day fishing trip in the Colorado Mountains back in 1991, I had a very badly sunburned face, with severe blistering all over my forehead, nose, cheeks and down to my neck.

When I say "severe blistering," I mean huge blisters that filled with water, were extremely painful and had to be popped, leaving dead skin all over my face.

The doctor prescribed silver sulfadiazine cream (i.e., Silvadene cream).  And as soon as I got home from the pharmacy and rubbed some onto my burnt face and neck the relief was immediate. Within three days you couldn't tell I’d been sunburned and blistered hardly at all.

Interestingly, silver sulfadiazine cream was initially used on burn patients in hospital burn wards, as a means of keeping the dead, necrotizing flesh of severe burn patients from becoming infected.  And it worked wonders.  According to a 1973 study in the journal Antimicrobial Agents and Chemotherapy:

"657 different types of bacteria from 22 different bacterial species were exposed to silver sulfadiazine. All strains were inhibited by levels which can easily be obtained topically. Strains resistant to sulfadiazine or multiple antibiotics were sensitive to silver sulfadiazine."

-- Carr, Howard S., Wlodkowski, Theodore J., and Rosenkranz, Herbert S. 1973. Silver sulfadiazine: in vitro antibacterial activity. Antimicrobial Agents and Chemotherapy, 4(5), 585- 587.

But what doctors soon discovered was that the silver also stimulated healing of the flesh, as well.  The dead necrotizing burned flesh was easier to debride after the silver treatment.  And the healthy pink skin that grew in underneath often grew at an astonishing pace.

How Can Silver Relieve Sunburn Pain?

Regarding colloidal silver’s remarkable ability to reduce pain when used topically, Dr. Aundrea Adams, Ph.D., of the International Institute of Holistic Healing, points out the following: 

"Many people are skeptical of claims that colloidal silver can take away pain and accelerate healing. Nevertheless, these impressive attributes are firmly grounded in medical science. 

Pain is caused by an interruption of the electrical current that normally flows throughout the body at 50 to 70 millivolts. At the point of injury, the current drops towards zero millivolts. This lack of electrical energy also impedes healing.

Silver is a superconductor that bridges the electrical gap and restores healthy current flow. You can prove this to yourself by placing a silver coin on a burn and experiencing instant pain relief. 

In clinical trials at an FDA-approved laboratory, even silver-coated bandages were proven to have analgesic and regenerative properties."

Indeed, it was way back in the 1970’s that Dr. Robert O. Becker, M.D., of Syracuse University, did his original ground-breaking research into silver’s healing and regenerative effects on skin, soft tissue, and even bone

So this information is nothing new.  It simply remains unacknowledged by modern medical science -- unless, of course, they have a prescription-only product like Silvadene cream they want to sell you, or some silver-impregnated bandages. Then silver is touted as a “miracle substance” by the medical establishment).

What I’d Do for a Burn, or Sunburn

I'm not a doctor.  So I can't and won't "prescribe" here.  But if I had a burn and couldn’t get a prescription for the Silvadene cream in a timely manner from my family doctor, I'd likely do one of the following to help stop the burn pain and stimulate healing:
  • I’d use a good commercial colloidal silver gel or cream product on it, such as any of the ones described in my previous article “Germ-Busing Colloidal Silver Gels and Creams,” at this link
  • Or, I’d make up a quick batch of the colloidal silver-based sunburn recipe described in last week’s article, and use that. 
  • And if those ingredients weren’t readily available, I’d go to my local health food store and buy a bottle of aloe vera gel, and add some colloidal silver to it using the very simple method demonstrated by yours truly in this short video
Short of that, many experienced colloidal silver users swear that simply using a pump spray bottle to spray 10 ppm liquid colloidal silver onto sunburned skin four or five times a day – essentially “misting” the burned areas of the body with colloidal silver, and allowing it to air dry -- helps bring rapid and dramatic relief from the sunburn pain and stimulates healing of the skin as well. 

As one colloidal silver advocate named “Jennifer” recently stated on the Colloidal Silver Secrets Community on Facebook, “I said this before, but I'll say it again . . . colloidal silver for sunburn works! For me, as long as I put it on at the first sign of sunburn, I have absolutely no itch, pain, or peeling!

Colloidal Silver for Severe Burns?

As pointed out in last week’s article, colloidal silver works on just about any kind of burn, not just sunburn. 

For example, in Dr. Robert O. Young's excellent book, The pH Miracle, I found the following dramatic account of a severe burn being healed with colloidal silver:

 "I was told I had second-and third-degree burns on my face and third-degree burns on my hands....the very next day my mother brought me colloidal silver, with directions to use it externally and internally as frequently as possible, because it assists in growth of new tissue.

She had learned from Dr. Young that silver's positive electrical charge counters the negative charge of a damaged body area, bringing it back into balance and enabling the body to regenerate and heal itself.

Mom sprayed undiluted colloidal silver onto the burned areas, and I took it by drops under my tongue...My mother applied the silver many times a day. It was absorbed into my skin instantly. It felt cool and tingling and loosened the tension on my face, hands, and fingertips...

…After only one day of treatment with silver, it was obvious the healing was happening very rapidly. New tissue and skin grew back at an accelerated pace. The swelling of my head diminished rapidly and the breathing apparatus came off almost immediately. 

The plastic surgeon told me I was healing twice as fast as any burn patient he had ever seen in his long career."

-- quoted from The pH Miracle: Balance Your Body, Reclaim Your Health by Robert O. Young, PhD., pgs 137-138

Here’s another interesting testimonial on using colloidal silver on a severe burn, which I recently received from a reader:

“Back in the late 1970's I was burned in a shop fire. My right arm from about 5 inches above the wrist to my elbow and about 2 1/2" wide was 2nd degree burned.

My doctor asked if he could wash the area with a special silver water solution to clean and disinfect it. He said it would be as good as prescription medication but a lot cheaper.

Since at that time I didn’t have any medical insurance I said to go ahead.  Well to make a long story shorter in less than 3 months my arm was healed with just small scarring that is now hardly visible. I never had an infection.

I changed my bandage myself and kept it moist with silver water, saw the doctor every other week and got a new supply of this wonder solution. 

I finally got the info on how to make silver water myself. It was just a simple, battery-operated unit, but it worked. 

My profession is a welder and small burns are a part of the job even wearing protective clothing. In almost 35 years of homemade silver water use I’ve never had an infection of welding burns, never had the flu, only very mild colds on several occasions."

Here’s another interesting testimonial on the nearly instantaneous relief experienced when colloidal silver is applied to a burn:

"Using colloidal silver on burns has been nothing short of astonishing. The relief is practically instant. I cannot promote it enough. Thx Steve for all your dedication and hard work. It is very much appreciated."

– Peter A.

And here’s another interesting testimonial, this one from a member of the Colloidal Silver Secrets Community on Facebook named Rachel:

“My most recent use of colloidal silver was as a burn remedy.  I burned myself pretty good, but used colloidal silver on it, and it didn't even blister and fill with fluid.

The skin turned white and stayed flat and painless. Then it just peeled.

I then used some colloidal silver mixed with essential oils of ylang ylang and frankincense and applied it to a burn on my daughter’s face from use of a welted curling iron.

It was completely healed with only redness on the skin that looked more like a light birthmark. It's amazing.”

– Rachelle B. 

And one more interesting colloidal silver testimonial:

"I must share my Burn story:  Last summer, I was cooking rice and when lifting the lid I got a major steam burn on my wrist.

The pain was unbearable, and my husband drove me to the hospital immediately because of the color my skin was, and how melted it looked.  He knew it was going to be a third degree.

So we got seen by a doctor after waiting in the waiting room, and all they did was dress it with a bandage and put some cream on it that he said would help with the pain and healing.. He also mentioned that I needed to fill a prescription for said cream(Silvadene).

My husband sneaked a peek at the ingredients and saw that silver was right at the top of ingredients.  We just nodded and said yes we would.

We came home that night and I soaked pads and bandages in colloidal silver three times a day so that the burn stayed moist. It was completely HEALED within 10 days to the point of not being able to tell I had a major burn just days before.

I was amazed at how beautiful it healed, as well as everyone around me." 

-- Jenn F.

As you can see, colloidal silver works amazingly well for burns, as well as sunburn, whether you use it as a topical gel or cream product, or simply apply some liquid colloidal silver to the burn repeatedly throughout the day. 

Make Your Own Colloidal Silver for Pennies

If you’re a do-it-yourselfer, like me, you can learn at this link how astonishingly inexpensive it is to make your own high-quality colloidal silver (i.e., about a penny per ounce) with a Micro-Particle Colloidal Silver Generator from The Silver Edge.

This means there’s no longer any need to pay $20 or $30 for a tiny, four-ounce bottle of colloidal silver in health food stores, when you can make it yourself by the quart for about 32 cents. 

If you’re skeptical, or if you think it must be a difficult process, at this link you’ll discover how incredibly simple it is to make your own colloidal silver.  

Indeed, with a device that’s even simpler to operate than a coffee pot (see above photo), just about anyone can make their own high-quality colloidal silver for just a few pennies per quart!

Finally, if you have questions about making and/or using colloidal silver, or would like to correspond with thousands of other experienced colloidal silver users, you might want to consider joining the Colloidal Silver Secrets Community on Facebook

There, you’ll find over 16,000 fellow colloidal silver users sharing their usage secrets and success stories as well as the latest news and information on the infection-fighting qualities of colloidal silver. 

Meanwhile, I’ll be back next week with another great article on colloidal silver….

Yours for the safe, sane and responsible use of colloidal silver,


Helpful Links:
                                                                                                                                                 
Important Note and Disclaimer:  The contents of this Ezine have not been evaluated by the Food and Drug Administration.  Information conveyed herein is from sources deemed to be accurate and reliable, but no guarantee can be made in regards to the accuracy and reliability thereof.  The author, Steve Barwick, is a natural health journalist with over 30 years of experience writing professionally about natural health topics.  He is not a doctor.  Therefore, nothing stated in this Ezine should be construed as prescriptive in nature, nor is any part of this Ezine meant to be considered a substitute for professional medical advice.  Nothing reported herein is intended to diagnose, treat, cure or prevent any disease.  The author is simply reporting in journalistic fashion what he has learned during the past 17 years of journalistic research into colloidal silver and its usage.  Therefore, the information and data presented should be considered for informational purposes only, and approached with caution.  Readers should verify for themselves, and to their own satisfaction, from other knowledgeable sources such as their doctor, the accuracy and reliability of all reports, ideas, conclusions, comments and opinions stated herein.  All important health care decisions should be made under the guidance and direction of a legitimate, knowledgeable and experienced health care professional.  Readers are solely responsible for their choices.  The author and publisher disclaim responsibility and/or liability for any loss or hardship that may be incurred as a result of the use or application of any information included in this Ezine. 

Copyright 2015 | Life & Health Research Group, LLC | PO Box 1239 | Peoria AZ 85380-1239 | All rights reserved.





Wednesday, July 8, 2015

A Colloidal Silver Recipe for Serious Sunburn Relief

 Learn more exciting ways to use colloidal silver at www.TheSilverEdge.com
If you’ve ever wondered if colloidal silver can be used successfully on burns and sunburn, here’s the anecdotal information you’ve been waiting for. 

And as an added bonus, you’ll learn a simple recipe for making your own silver salve burn treatment. 

According to the author, this easy-to-make salve has provided similar beneficial effects to prescription silver sulfadiazine cream (one of the most popular prescription burn creams in the world), but without the need for a prescription.

[Notice:  The following copyrighted guest article, "A Recipe for Serious Sunburn Relief," is reprinted with permission from the Grow Your Own Groceries blog, which is quickly becoming one of my favorite blogs for do-it-yourself and self-sufficiency (aka prepper) information. -- Steve] 

I’ve been a fan of colloidal silver ever since I had an unfortunate run-in with a burst radiator hose. I suffered 2nd degree burns all over the right side of my face, neck, shoulder, chest, and arm. I had several smaller areas of 3rd degree burning on my collar bone and armpit.

A nearby urgent care clinic prescribed me a miracle salve called silver sulfadiazine 1%. This salve almost immediately gave me relief from the overwhelming pain of my burns.

I had many concerns at the time – the volume of skin I had lost, the potential for infection, the certain scarring I would have, and the ever-present pain. But all I could do was go home and apply the silver salve according to the directions on the label.

I applied the salve with extreme care several times each day. After less than a week I lost a layer of skin that was basically dead and dry. I was left with the sensitive pink skin underneath, but no open wounds, no infection, and only minimal scarring!

It seemed that there was very little actual damage. I kept applying the silver salve for another week, and that was that. Completely healed. I avoided some pretty unthinkable pain and complications.

Within about four months, you couldn’t even see any evidence of scarring. Although to this day, when I get sun on the area, certain portions of the skin never get color – that’s really no big deal.

Ever since this happened, I have been looking for silver sulfadiazine 1%, but it is only available with a prescription. I do not want to grapple with another radiator hose to get a prescription – the hose always wins. Moreover, the prescription salve runs for more than $69 for a tiny 4 oz jar, and insurance doesn’t always cover it.

But this stuff is superb – it knocks out severe sunburns overnight. I used the remainder of my prescription on various minor burns and skin issues with 100% success.

I did some internet research and spoke with some chemists from a local university, and I came up with a “DIY” formula that has proven to have effects similar to the prescription silver sulfadiazine 1%, without the need for a prescription.

The formula is below, but please note that you should talk to your doctor before putting anything on or in your body. The prescription for silver sulfadiazine 1% comes with a warning that pregnant women ad anyone with allergies to silver should not use it, so I would imagine the same goes for this homemade stuff, or any colloidal silver products for that matter.

Homemade Silver Salve Burn Treatment

Instructions

In a small (4 oz) jar, add:

·       2 Tablespoons virgin, raw coconut oil
·       1 Tablespoon 100% Aloe vera gel
·       1 Tablespoon colloidal silver (15ppm – 28ppm recommended)
·       4 drops of essential oil for fragrance

Put the lid on the jar and shake the heck out of the mixture to blend it completely. That’s it!

For the essential oil, I recommend doTerra Lavender because it is good for skin irritation and it smells awesome, but you can use peppermint or whatever you like to give it fragrance.

If you have an Aloe vera plant available, I highly recommend squeezing the juice of a full leaf into the mix. This is what I did, and I think that contributed to this salve’s awesome effectiveness. The batches I have made turn white when mixed, which is cool because the separate ingredients are all totally clear.

Note that you should always keep colloidal silver out of direct sunlight, and you shouldn’t refrigerate it because the silver ions will re-bind and then sink to the bottom.

However, since this solution is thicker than straight colloidal silver, I’m guessing that it won’t be an issue. I opted to refrigerate my latest batch because it’s hot in AZ and I want the fresh ingredients to last the summer. I’ve used this salve several times to conquer even blistering sunburns on my nephew’s nose, and I can’t say enough about it.

--------------------------

I hope you've enjoyed the guest article from the Grow Your Own Groceries blog. 
  • Click here to check out over 100 in-depth articles on making and using colloidal silver.  
  • Learn how to make your own high-quality colloidal silver for less than 36 cents a quart at this link.
  • Discover how to save $100 on the world's #1 best-selling Micro-Particle Colloidal Silver Generator from The Silver Edge, at this link
Meanwhile, I’ll be back next week with another great article on colloidal silver….

Yours for the safe, sane and responsible use of colloidal silver,


Helpful Links:
                                                                                                                                                 
Important Note and Disclaimer:  The contents of this Ezine have not been evaluated by the Food and Drug Administration.  Information conveyed herein is from sources deemed to be accurate and reliable, but no guarantee can be made in regards to the accuracy and reliability thereof.  The author, Steve Barwick, is a natural health journalist with over 30 years of experience writing professionally about natural health topics.  He is not a doctor.  Therefore, nothing stated in this Ezine should be construed as prescriptive in nature, nor is any part of this Ezine meant to be considered a substitute for professional medical advice.  Nothing reported herein is intended to diagnose, treat, cure or prevent any disease.  The author is simply reporting in journalistic fashion what he has learned during the past 17 years of journalistic research into colloidal silver and its usage.  Therefore, the information and data presented should be considered for informational purposes only, and approached with caution.  Readers should verify for themselves, and to their own satisfaction, from other knowledgeable sources such as their doctor, the accuracy and reliability of all reports, ideas, conclusions, comments and opinions stated herein.  All important health care decisions should be made under the guidance and direction of a legitimate, knowledgeable and experienced health care professional.  Readers are solely responsible for their choices.  The author and publisher disclaim responsibility and/or liability for any loss or hardship that may be incurred as a result of the use or application of any information included in this Ezine. 

Copyright 2015 | Life & Health Research Group, LLC | PO Box 1239 | Peoria AZ 85380-1239 | All rights reserved.




Tuesday, June 30, 2015

Colloidal Silver Makes Cut Flowers Live Longer

 Learn more about the infection-fighting qualities of colloidal silver at www.TheSilverEdge.com
How would you like your cut flowers to last up to twice and long, with the blooms remaining vibrantly colored and wilt-free during the entire time?

Here’s a nifty tip that really works:  Add a little bit of colloidal silver to the water in the flower vase in order to prevent microbial growth and stop bacteria from colonizing the flower stem! 

Experienced colloidal silver users have taken advantage of this technique for decades, which allows cut flowers to thrive longer than any other known method of fresh cut flower preservation. 

And now there’s scientific proof demonstrating why and how it works.  Here’s the story you won’t find anywhere else...

Hi, Steve Barwick here, for The Silver Edge

Several decades ago, when independent colloidal silver researchers such as Mark Metcalf and others were writing about the many healing benefits of colloidal silver, one of the fascinating facts they pointed out was that if colloidal silver were added to cut flowers in a vase, the flowers would last far longer than flowers that had not been treated with silver.

As Mark Metcalf wrote at the time, in the 1996 issue of Perceptions Magazine:

My next experiment was a little different.  I cut flowers in the back yard and left one on a shelf without water for twenty-four hours.

When I picked it up the next day it was completely limp.  I made a fresh cut at the bottom of the stem and placed it in a glass of high concentrate colloidal silver.

Each day it got better.  On the third day, the stem had become firm again, as if it had just been cut.  Not a single petal was lost.

The second flower that was cut had been placed immediately in ordinary water.  Many of its petals had already fallen.  Though the flower was in water from the start, it was already dying.

It’s as if there is something in silver that is tied to the very core of the life process itself.

These anecdotal reports were sometimes sneered at by mainstream scientists and the mainstream media.  But they can’t be sneered at any longer, because since that time clinical researchers have repeatedly proven them to be true.

Proven True

For example, in 2014, scientists from the Department of Horticulture at Ferdowsi University of Mashhad, Iran tested the hypothesis that silver-treated cut flowers in a vase would last up to twice as long as untreated cut flowers in a vase.

What they found was that in the untreated cut flowers, bacteria rapidly formed in the vase water, and quickly colonized the xylem of the flower, which are the tiny micro-tubular channels in the flower stem (similar to veins, in humans) that bring nutrients and moisture to the flowering head itself.

But in the silver-treated flower vases, the bacterial growth was dramatically reduced, and therefore the xylem remained unblocked by bacterial colonization for longer periods of time.  This allowed moisture and nutrients to be effectively carried up the stem far longer than in untreated cut flowers.  The result was beautiful fresh flowers that lasted up to twice as long as normal.

As explained in this August 21, 2014 press release from Inderscience titled “Cut Flowers Last Longer with Silver Nanotechnology”: 

Once cut and dunked in a vase of water, flowers are susceptible to bacterial growth that shortens the length of time one has to enjoy the blooms.

A few silver nanoparticles sprinkled into the water, might be the answer to longer-lasting cut flowers according to research published in the International Journal of Postharvest Technology and Innovation.

Once the stems are cut and flowers added to a vase bacteria start to colonize the open ends of the stems and block the channels through which water enters. This is the main cause of a short-lived display even for the most expensive flowers, such as lilies, roses and freesias.

Many florists provide a small packet of plant food with their bouquets, but this does nothing to prevent the stems becoming blocked with bacteria.

Adding a drop of household bleach is perhaps a useful tip, but not all flower lovers wish to have the odor of bleach in the vase spoiling the scent of their flowers.

Now, a team in the Department of Horticulture at Ferdowsi University of Mashhad, Iran, have tested silver nanoparticles, which are known to have antibacterial activity, in extending the blooming life of cut lilies (Lilium orientalis cv. 'Shocking').

They used suspensions of silver nanoparticles in water at levels of 5, 15, 25, 30 parts per million (ppm) and compared the floral life against controls with untreated vase water.

Seyed Hossein Nemati and colleagues found that control blooms gave a bright flora display on average for just under a week. Whereas the lower concentrations of silver nanoparticles extended this period by a couple of days.

However, at 35 ppm their blooms were maintained with good color and healthy petals for almost twice as long as the controls (less than 12 days).

Analysis of the stems and water revealed that at this concentration of silver nanoparticles bacterial growth was stymied for the longest period compared with controls where bacterial growth began within the first two days.

[More information: Nemati, S.H., Esfandiyari, B., Tehranifar, A., Rezaei, A. and Ashrafi, S.J. (2014) “Improvement of Vase Life and Post-harvest Factors of Lilium orientalis Bouquet by Silver Nanoparticles,” Notulae Scientia Biologicae.]

Higher Concentrations
of  Silver Worked Better

In their study, the clinical researchers pointed out that all four concentrations of silver nanoparticles (i.e., 5, 15, 25, 30 ppm) “significantly enhanced the vase life of cut flowers,” but that the higher concentration produced the longest extended life. 

The researchers concluded, “Owing to its strong antibacterial properties, silver nanoparticles are dramatic tools for extending cut flowers post harvest life.”

The researchers also pointed out that even at the highest concentration used (i.e., 30 ppm) there were no apparent toxic effects on the flowers. 

What’s more, the ability of the cut flowers to uptake nutrients decreased rapidly in the control flowers that had no silver added, while the nutrient uptake of the flowers in the water treated with silver nanoparticles barely decreased during the lifetime of the cut flowers. 

Finally, the fresh weight of the control flowers that were not treated with silver nanoparticles dropped significantly over a period of several days, while the silver-treated flowers “maintained fresh weight at high values” according to the researchers.

In short, the researchers discovered that higher concentrations of silver nanoparticles used in the vase water resulted in far less microbial growth.  This in turn resulted in far lower bacterial colonization and “clogging” of the xylem of the flower (i.e., the vessels or channels in the stem that bring nutrients to the flower head itself). 

Another Clinical Study

Another clinical study, this one by Chinese researchers, also confirms silver’s life-extending properties for cut flowers.

Rose-growing expert Robert B. Martin, of the Pacific Rose Society, explains it as follows:

Having been aware of the growing development of nanotechnology as well as the use of silver to preserve cut flowers, I was therefore fascinated to read in the column on Recent Rose Research in the January/February 2011 issue of the American Rose of a study by five Chinese researchers titled “Nano-silver pulse treatments improve water relations of cut rose cv. Movie Star flowers”.

The study itself appeared in a recent issue of the scientific publication Postharvest Biology and Technology. 

According to the abstract of the article, the vase life of cut roses of the variety ‘Movie Star,’ when placed in deionized water, was normally only 9 to 10 days regardless of maturity at harvest.

However, when those flowers were placed in a nanosilver base solution for 24 hours and then kept in a low concentration nanosilver solution, the vase life of the cut rose flowers was prolonged by an additional 11.8 days.

Further examination revealed that the silver solution not only alleviated and delayed vascular blockage caused by bacterial contaminations but also inhibited stomatal conductance so that the water balance in cut roses was significantly improved.

Put simply, the vase life of roses treated with a nanosilver solution was extended from about 9 days to over 20 days, primarily because the silver inhibited bacterial contamination.

Once again, we see that clinical research proves fresh cut flowers will last up to twice as long when silver is used to treat the flowers.

Even More Evidence

 Learn more about the infection-fighting qualities of colloidal silver at www.TheSilverEdge.com
According to the book, Horticultural Reviews, by Jules Janick, in a chapter titled “Stems Placed Directly in Water After Cutting,” there have been a number of additional studies demonstrating silver to extend the life of cut flowers by reducing bacterial growth in the vase water. As Janick explains:

Cut stems of flowers often have difficulties taking up water.  Lack of adequate water uptake can occur after a few days in stems placed in a vase solution, even if the stem cut surface had never been exposed to air. 

This problem mainly relates to the development of bacteria that clog the xylem vessels, which occurs within 2-3 days of vase life…

…The effect of bacteria seems a purely physical phenomenon.  Bacteria cannot pass the pit membranes between xylem conduits as the pores in these membranes are too small and bacteria are unable to digest the membrane.  They occlude the small pores in the membrane, through which all water has to pass…

…A dip of the stem in an aqueous solution containing silver ions, or the continuous presence of Ag+ [i.e., ionic silver] in the vase solution, inhibited bacterial growth in cut flower stems and in the vase water (van Doorn 1997). 

Recently, silver nanoparticles have also been used.  Solgi et al. (2209) applied silver nanoparticles to Gerbera jamesonii ‘Dune,’ and compared its effect with silver nitrate. 

The chemicals were included in the vase solution along with 6% sucrose.  Vase life was 8 days in controls, and 11 days in the silver plus sugar treatments.  The nanoparticles had the same effects as silver ions.

Liu et al. (2009) reported that freshly cut ‘Ruikou’ Gerbera flowers had a longer vase life when treated with colloidal silver nanoparticles, compared to a treatment with just water.  The longest vase life was 8.9 days compared with 3.6 days in the controls.”

In short, according to Janick’s Horticulture Reviews, clinical studies have demonstrated that both ionic silver and metallic silver (i.e., silver nanoparticles) can extend the life of cut flowers by almost double, simply by inhibiting bacterial growth in the water in the vase. 

In Summary

The Latvia-based company, Ag-Life.com, also known as SIA Silver Technologies Ltd., sums it all up as follows, in a message to professional florists:

“Fresh and healthy flowers are the best advertising for every florist. However, it is impossible that all flowers would look freshly cut by the time of buying, even if water in the vase was changed frequently.

The use of silver water will noticeably increase time to the moment of flower fading and will make the offer of your shop more attractive in customers' eyes.

Colloidal silver water consists of microscopic silver particles that, when being used in particular concentration, can eliminate about 700 harmful bacteria, viruses, fungi, and other types of microorganisms.

Premature aging and fading of cut flowers' cells is frequently caused by putrefactive bacteria and other pathogenic microorganisms. Colloidal silver not only destroys pathogens in water, but also, getting into the plants' cells, delays aging processes inside plant and recovers damaged cells.

Flowers, put into the vase with colloidal silver, will preserve their freshness for 7- 10 days longer. For some cut flowers this period may reach even up to 2 months.

Silver water may be also used for spraying and watering plants. This way it will not only delay the process of fading, but also save plants from fungi and other diseases.

What is more, such water does not leave marks on leaves or flowers, and it does not contain chemicals hazardous for human health.”

The bottom line is that colloidal silver truly can make cut flowers last up to twice as long in the vase, or even longer with some flower species.  And it’s all thanks to the wondrous, germ-fighting capabilities of the silver itself. 

More Information

For additional information using colloidal silver on flowers and plants, including garden plants, see:
Even More Unusual Uses for Colloidal Silver

To learn about more unusual uses for colloidal silver, see the following three articles:
You can also learn how hundreds of experienced colloidal silver users have healed their own infections and diseases with colloidal silver, at this link

Make Your Own Colloidal Silver for Pennies

 Learn more about the infection-fighting qualities of colloidal silver at www.TheSilverEdge.com
If you’re a do-it-yourselfer, like me, you can learn here how astonishingly inexpensive it is to make your own high-quality colloidal silver (i.e., about a penny per ounce) with a Micro-Particle Colloidal Silver Generator from The Silver Edge.

This means there’s no longer any need to pay $20 or $30 for a tiny, four-ounce bottle of colloidal silver in health food stores, when you can make it yourself by the quart for about 32 cents. 

If you’re skeptical, or if you think it must be a difficult process, at this link you’ll discover how incredibly simple it is to make your own colloidal silver.  Indeed, with a device that’s even simpler to operate than a coffee pot (see above photo), just about anyone can make their own high-quality colloidal silver for just a few pennies per quart!

Finally, if you have questions about making and/or using colloidal silver, or would like to correspond with thousands of other experienced colloidal silver users, you might want to consider joining the Colloidal Silver Secrets Community on Facebook

There, you’ll find over 16,000 fellow colloidal silver users sharing their usage secrets and success stories as well as the latest news and information on the infection-fighting qualities of colloidal silver. 

Meanwhile, I’ll be back next week with another great article on colloidal silver….

Yours for the safe, sane and responsible use of colloidal silver,


Helpful Links:
                                                                                                                                                 
Important Note and Disclaimer:  The contents of this Ezine have not been evaluated by the Food and Drug Administration.  Information conveyed herein is from sources deemed to be accurate and reliable, but no guarantee can be made in regards to the accuracy and reliability thereof.  The author, Steve Barwick, is a natural health journalist with over 30 years of experience writing professionally about natural health topics.  He is not a doctor.  Therefore, nothing stated in this Ezine should be construed as prescriptive in nature, nor is any part of this Ezine meant to be considered a substitute for professional medical advice.  Nothing reported herein is intended to diagnose, treat, cure or prevent any disease.  The author is simply reporting in journalistic fashion what he has learned during the past 17 years of journalistic research into colloidal silver and its usage.  Therefore, the information and data presented should be considered for informational purposes only, and approached with caution.  Readers should verify for themselves, and to their own satisfaction, from other knowledgeable sources such as their doctor, the accuracy and reliability of all reports, ideas, conclusions, comments and opinions stated herein.  All important health care decisions should be made under the guidance and direction of a legitimate, knowledgeable and experienced health care professional.  Readers are solely responsible for their choices.  The author and publisher disclaim responsibility and/or liability for any loss or hardship that may be incurred as a result of the use or application of any information included in this Ezine. 

Copyright 2015 | Life & Health Research Group, LLC | PO Box 1239 | Peoria AZ 85380-1239 | All rights reserved.


Wednesday, June 24, 2015

Making BIG Batches of Colloidal Silver for About a Penny Per Ounce

 Learn more about making big batches of colloidal silver at www.TheSilverEdge.com
Last week my wife Kathy and I made two, two-and-a-half gallon batches of colloidal silver, side-by-side, using our Micro-Particle Colloidal Silver Generators.

The first photo shows the two, 2.5 gallon containers uncovered, with the Micro-Particle Colloidal Silver Generators on top. 
 Make big batches of colloidal silver for pennies at www.TheSilverEdge.com

The second photo shows the two containers with pillow cases wrapped around them to keep the light out during the colloidal silver-making process, since we were making them in a room that’s normally brightly lit most of the day. 

When completed, we had a whopping 5 gallons worth of high-quality micro-particle colloidal silver, at a total cost of about $5.

Hi, Steve Barwick here, for The Silver Edge

Yes, that's five dollars for five full gallons worth of colloidal silver, simply by making it ourselves with a Micro-Particle Colloidal Silver Generator.

Compare that to health food store prices of $20 or $30 for a tiny four-ounce bottle of colloidal silver, and you'll see why I always say if you’re going to use colloidal silver extensively, then you should always make it yourself for about 25 cents a quart with a high-quality Micro-Particle Colloidal Silver Generator from The Silver Edge.  

Indeed, rather than paying exorbitant health food store prices of $7 to $10 per ounce, you can quite literally make your own high-quality micro-particle colloidal silver for about a penny per ounce!

Here are some of the questions I received when I posted the above photos to the Colloidal Silver Secrets Community on Facebook:

Question:  Why do you make so much colloidal silver?

Answer:  Because my wife and I use it for just about everything from household disinfection to facial skin rejuvenation to treating topical and internal infections both in ourselves as well as in our rescue dogs. 

My wife even adds colloidal silver to the rinse cycle of the laundry when she washes the kitchen and bathroom wash rags and towels, or bed sheets, or undergarments and more. 

She also uses it on her outdoor garden plants, to help get rid of aphids, tomato fungus, and other pests and problems.  Not only do the plants grow faster and stronger, but the fruits and veggies they produce are absolutely superb compared to the past when she didn’t use colloidal silver in the garden.

We’ve even used colloidal silver on our outdoor mulch pit to get rid of gnat hatchlings. 

And of course, we give away quarts of colloidal silver at a time to friends, family members, neighbors, co-workers and others. 

In fact, no matter where we’ve lived, we’ve ended up being just about the most popular people on the block once our neighbors have found out that we can make colloidal silver for about 25 cents per quart.

The bottom line is that safe, natural colloidal silver is our #1 go-to resource for dealing with an innumerable number of things around the house that would otherwise require expensive (and potentially toxic) chemical products or prescription drugs.
Question:  Why do you cover the large containers while making the colloidal?

Answer:   When you buy colloidal silver from a health food store, you’ll notice it’s always sold in dark glass or sometimes dark plastic bottles.  That’s because the manufacturers know the silver will retain its potency almost indefinitely as long as it’s not exposed to bright light.

Since it takes 30 hours of production time to make a large, two-and-a-half gallon batch of colloidal silver, like those above, it’s vital to keep bright light off the production container while colloidal silver is being made. 

Otherwise, prolonged exposure to bright room light or sunlight can cause silver particles to “tarnish” and ultimately fall out of suspension over time, which of course, can destroy the effectiveness of your colloidal silver. 

So if we don’t have a completely dark room available in which to make colloidal silver (which is preferable), we instead cover the glass production container with anything that helps keep bright light out.  And it works like a charm!

For the same reason, once you’ve made some colloidal silver it should also be stored in either dark glass storage containers, or kept in a dark cabinet out of bright light. 

Question:  What brew time are you using for 2.5 gallon batches?

Answer:  I usually use 30 hours for a 2.5 gallon batch.  That’s three hours for every quart of colloidal silver you’re “brewing.” 

The Micro-Particle Colloidal Silver Generator from The Silver Edge will actually run for days at a time with no problem, though most people use them to make the standard one-quart batches which take only three hours to produce 7-10 ppm colloidal silver.

Question:  Where do you find those large 2.5 gallon glass cookie jars you’re using to make colloidal silver in?

Answer:  You can find them on Amazon.com, or any number of other online retailers.   Since they’re widely available from different vendors (and at different prices) the easiest thing to do is to go to Amazon.com and use their search engine to search for “1 gallon glass cookie jars” or “2.5 gallon glass cookie jars” or whatever you want. They almost always have them. 

 Make big batches of colloidal silver at www.TheSilverEdge.com
Another idea is to search Amazon.com for “1 gallon glass fermentation jar.”  These oversized glass jars are usually used for fermenting Kombucha tea. 

I haven’t used these one-gallon glass fermentation jars yet for making colloidal silver.  But they look perfect for the task.  And at the time of this writing, they’re available on Amazon.com (priced from $5.50 to $11.57 each).  They look like they’d be perfect for making gallon-sized batches of colloidal silver. 
 Make big batches of colloidal silver for pennies at www.TheSilverEdge.com

And yes, oftentimes there’s even gallon-sized Ball canning jars on Amazon.com.  Just search for “Ball 125th Anniversary Collector’s Jar 1 Gallon.”  These even come with a cool metal lid with a plastic insert on the inside, so you don’t have to search for plastic lids. 

Important safety note:  You have to make sure that the mouth of the production jar is small enough that the generator itself cannot fall into the water, or be accidentally knocked into the water during the colloidal silver-making process, which could result in a potential shock or electrocution hazard.  The mouths on the half-gallon and gallon-sized Ball canning jars are fine.  I’ve already checked them out, and I’ve used them myself for making large batches of colloidal silver with a Micro-Particle Colloidal Silver Generator from The Silver Edge.  But you’ll have check on the measurement of the mouth of any other large jars you might come across, to make sure they’re not wider than the generator itself (i.e., 4 ½ inches).  There’s no need to risk life-and-limb making colloidal silver, when it’s otherwise such a safe and simple task. 

 Learn to make colloidal silver for pennies at www.TheSilverEdge.com
Question:  Can you make smaller batches?

Answer:  Yes, of course.  The Micro-Particle Colloidal Silver Generator from The Silver Edge was actually designed for making one-quart of colloidal silver at a time, in three hours of production time.  Its ability to maker larger-sized batches is just icing on the cake, so to speak.

You can use a one-quart wide-mouthed glass Mason jar or Ball canning jar to make these smaller batches.  Here’s a short 3-minute video demonstrating how to make normal, one-quart batches of colloidal silver, quickly and easily. 

You can even buy two-quart (i.e., half gallon) Mason jars or Ball canning jars at Walmart or other stores (or online at Amazon.com), and make double-sized batches simply by letting the generator run twice as long (i.e., six hours for a half gallon jar, instead of the usual three hours for a quart-sized jar).

Or, you can watch the short video at this link (i.e., How to Make Big Batches of Colloidal Silver) to learn more about making the extra-large batches of colloidal silver (i.e., gallon-sized or larger) with a Micro-Particle Colloidal Silver Generator from The Silver Edge. 

The video at the above link explains how long your pure silver rods need to be when making larger than usual batches…how you can quickly calculate the length of time you’ll need to let the generator run for different sized batches…and some important safety tips, as well.

One final tip for making large batches:  When you make extra-large batches of colloidal silver (i.e., half-gallon sized or larger), you’ll likely end up with lots of silver oxide tarnish on your silver rods by the end of the process.  Silver oxide tarnish on the silver rods is a normal part of the colloidal silver-making process.  And the longer your generator needs to run, the more of it you'll see on the silver rods.  What's more, when making larger batches, some of the extra silver oxide tarnish that’s produced will inevitably fall off the rods and drop to the bottom of the production jar when you lift the generator at the end of the production process.  Don’t worry.  It’s no big deal.  The silver oxide is harmless.  And it will sink to the bottom of the jar because there’s no electrical charge on it to keep it in suspension.  So once you’ve finished making an extra-large, gallon-size or bigger batch of colloidal silver, and begin to pour it into your storage containers, when you get down to the last inch or so of colloidal silver at the bottom of the jar where the silver oxide tarnish has accumulated, simply pour it through an unbleached paper coffee filter as shown in this short video titled Filtering Your Colloidal Silver Solution.  The paper coffee filter will filter out the silver oxide particles perfectly, allowing you to capture that last inch or so of colloidal silver so as not to waste it. 

Learn More…

If you’d like to learn even more about making your own high-quality colloidal silver for just a few pennies per quart, you can…
  • Read how unbelievably simple it is to make your own high-quality colloidal silver for less than 36 cents a quart, here.
  • Learn why the Micro-Particle Colloidal Silver Generator is the world’s #1 best-selling colloidal silver generator, here.
  • Find out how to save a whopping $100 on a brand new Micro-Particle Colloidal Silver Generator, here. 
Meanwhile, I’ll be back next week with another great article on colloidal silver….

Yours for the safe, sane and responsible use of colloidal silver,

Steve Barwick, author


Helpful Links:
                                                                                                                                                 
Important Note and Disclaimer:  The contents of this Ezine have not been evaluated by the Food and Drug Administration.  Information conveyed herein is from sources deemed to be accurate and reliable, but no guarantee can be made in regards to the accuracy and reliability thereof.  The author, Steve Barwick, is a natural health journalist with over 30 years of experience writing professionally about natural health topics.  He is not a doctor.  Therefore, nothing stated in this Ezine should be construed as prescriptive in nature, nor is any part of this Ezine meant to be considered a substitute for professional medical advice.  Nothing reported herein is intended to diagnose, treat, cure or prevent any disease.  The author is simply reporting in journalistic fashion what he has learned during the past 17 years of journalistic research into colloidal silver and its usage.  Therefore, the information and data presented should be considered for informational purposes only, and approached with caution.  Readers should verify for themselves, and to their own satisfaction, from other knowledgeable sources such as their doctor, the accuracy and reliability of all reports, ideas, conclusions, comments and opinions stated herein.  All important health care decisions should be made under the guidance and direction of a legitimate, knowledgeable and experienced health care professional.  Readers are solely responsible for their choices.  The author and publisher disclaim responsibility and/or liability for any loss or hardship that may be incurred as a result of the use or application of any information included in this Ezine. 

Copyright 2015 | Life & Health Research Group, LLC | PO Box 1239 | Peoria AZ 85380-1239 | All rights reserved.