Since there are no
clinical studies I’m aware of on this topic, I’ve turned to CPAP users to see
what they have to say. Here’s what
experienced CPAP users who add a little bit of colloidal silver to the water
reservoir of their CPAP machine have told me…
Hi, Steve Barwick here, for The Silver Edge…
Some people write me asking if adding colloidal silver to the
reservoir in their CPAP machine will keep the water and breathing apparatus from
getting “funky” (i.e., coated with gunk and microbes).
Other people want to know if using colloidal silver in a
CPAP machine will help with their breathing problems, or help keep their lungs
infection-free.
We’ll discuss those issues, in just a moment, but first…
What’s a CPAP Machine?
For those who don’t know, a CPAP machine is a “Continuous Positive
Airway Pressure” machine -- a device that helps people with a condition called sleep
apnea in which airways constrict and normal breathing stops periodically during
sleep.
The CPAP machine allows sleep apnea sufferers to breathe
more easily during sleep, and thus keep their body’s oxygen levels from getting
too low.
To do this, an air mask is worn at night. The device increases air pressure in the airways
to help keep them open and keep oxygen flowing into the lungs while the
individual is sleeping.
However, to prevent the soft tissues in the throat and lungs
from drying out and cracking due to the added air pressure, a small amount of
distilled water is usually added to a water reservoir in the CPAP machine.
Tiny amounts of this water are picked up by the air current,
which in turn helps keep the soft tissues in the throat and lungs moist.
This small amount of moisture helps prevent the drying and
cracking of tissues in the throat and lungs so often experienced by CPAP users.
The problem is, sometimes the water in the CPAP machine, if
not changed frequently enough, can get contaminated with bacteria or fungus,
and CPAP users can end up with serious chronic upper respiratory infections,
bouts of bronchitis or even pneumonia.
As one unfortunate individual found out the hard way:
“…I
have been frustrated with sleep apnea and having to use the CPAP device. I was
diagnosed in 2008 and since then have had re-occurring bouts of what has been
diagnosed as sinusitis.
Late last year (Oct) I contracted a rather serious bout of bronchitis. I was prescribed the usual antibiotics and inhaler and after about 6 weeks started to show some signs of recovery.
Then
in April it came back and the same sort of regiment was applied again, another
6-8 weeks.
Early
July again…this time I got into a local clinic as my GP was booked, same
routine antibiotics and inhaler.
I
had just recovered from that episode when it hit again this time sending me to
the ER as now my breathing was severely compromised.
Chest
Xray’s led the Dr. to diagnose bronchitis once again and once again the
aforementioned regiment -- however each time the antibiotics seemed to change
and Prednisone was added.
I
suspected something with my machine must be causing this and despite a thorough
cleaning on regular basis I decided it was time for an upgrade.
The
technician examined my old machine closely and was able to get inside and I was
horrified to hear him tell me it was infected with mold!
…So I suspect I have mold that has taken up residence in my nasal cavity if not lungs as each night the constant air pressure sends these spores into my lungs causing the bronchial like conditions.
What else could it be?
Many
of the symptoms a lot of CPAP users describe sound so familiar, sinus headaches,
chronic infections, facial pressure, nasal discharge, dry and very wet cough,
extreme fatigue and the list goes on.
…Someone
will make a fortune when they invent a CPAP machine that is mold and
infection-free and smart enough to force only enough air to prevent an apnea
episode throughout the night.”
That pretty much sums up the experiences many people have
had with their CPAP machines becoming contaminated with microbial growth that
can later cause upper respiratory infections such as sinusitis, bronchitis, pneumonia
and more.
Experimental
To help resolve this potentially very serious issue, a lot of CPAP users add anywhere from a teaspoonful to an ounce or two of 10 ppm colloidal silver to the distilled water in their CPAP machine’s water reservoir.
To help resolve this potentially very serious issue, a lot of CPAP users add anywhere from a teaspoonful to an ounce or two of 10 ppm colloidal silver to the distilled water in their CPAP machine’s water reservoir.
They claim this helps keep the water in the reservoir
disinfected and clean of microbial buildup.
It reduces the frequency with which the water needs to be changed. And more importantly, it is said to help
prevent the chronic upper respiratory infections so often associated with CPAP
machine usage.
I’ve never used a CPAP machine, so I've never had the
opportunity to experiment with using colloidal silver in one.
But the operative word is "experiment" because that's exactly what people who use colloidal silver in their CPAP machine are doing.
That’s because there are no clinical studies showing that it's safe to breathe colloidal silver into your lungs for hours a day on a regular daily basis.
But the operative word is "experiment" because that's exactly what people who use colloidal silver in their CPAP machine are doing.
That’s because there are no clinical studies showing that it's safe to breathe colloidal silver into your lungs for hours a day on a regular daily basis.
The animal studies
I’ve seen have demonstrated that after 90 days of breathing an atomized colloidal
silver mist into the lungs, animals started accumulating silver in their lungs,
which led to reduced lung function over time.
Of course, as in many animal studies in which silver is
involved, overly-large dosages of silver were used by the researchers. So it’s difficult to know for sure how those
studies may, or may not, apply to humans inhaling small amounts of colloidal
silver into their lungs at night through their CPAP machines.
So while these animal studies do not constitute “proof” that
small amounts of silver inhaled into the lungs regularly, over long periods of
time, is bad for you, at the very least they certainly indicate that the lowest
levels possible should be used for anyone considering experimenting with this
idea.
What CPAP Users Say
Over the years, a lot of CPAP users have told me they add colloidal silver to their water tank. As one gentleman recently wrote:
Over the years, a lot of CPAP users have told me they add colloidal silver to their water tank. As one gentleman recently wrote:
“My
CPAP reservoir holds about 14 oz of liquid. Typically I'll add 1 oz to 2 oz of
colloidal silver, depending upon various factors, with the remainder liquid
being distilled water...
I
have tried a full reservoir of colloidal silver and it appears to work fine
insofar as the uptake and therapy go.
I
note though that the more colloidal silver I add to the reservoir the more
problems I appear to have with the mucous membrane drying out in my nose,
mouth, and throat...
I
will say that I have no fungal growth problems with my hose or nose/mouth mask
on my CPAP when using colloidal silver in the reservoir.
My
wife had a fungal problem in her reservoir and hose until she started adding an
ounce or two of colloidal silver to her machine and now she has none. Hope this
helps."
I find that particular anecdotal account quite
interesting.
It appears from the above anecdotal account that adding too much colloidal silver to the water
reservoir (i.e., straight colloidal silver, instead of few ounces mixed into a
reservoir full of distilled water) negates the purpose of the distilled water,
which is to help keep the soft tissues in the nose, mouth and throat from
drying out.
That’s probably because of mineral residue (i.e., silver) that
ends up coating the lungs and afterwards drying them out, sort of like the
spots on a newly cleaned glass that’s been sitting in the dish rack for awhile
to dry.
But adding just the right
amount of colloidal silver to the reservoir (i.e., an ounce or two of 10
ppm colloidal silver to 14 ounces of distilled water) appears to stop microbial
growth in the water reservoir and the breathing apparatus without the negative
effect of drying out the mucous membranes caused by using straight colloidal
silver in the CPAP machine.
Another CPAP user wrote:
"I
use colloidal silver in a CPAP, and the water does not get funky.
I
used to have to clean my water tank and hose about every week. Now I clean it
about every gallon of distilled water, which is usually a month or so.
Once
cleaned, I add an ounce of colloidal silver (just for the first fill). Now
there are no weird smells or funkiness.
Plus
it could be a coincidence but I used to always get bronchitis - I have not had
a problem since I began doing this."
So according to this anecdotal account, it appears that the
addition of a relatively small amount of colloidal silver to the CPAP water
reservoir (i.e., one ounce) helps keep the water disinfected, and helps prevent
microbes from reaching the lungs and triggering bouts of bronchitis.
Another individual – a COPD patient -- wrote to say the
following:
“I
have COPD. I also use a CPAP for
sleeping and use both an ampule of Albuterol and about 1 ounce of colloidal silver
in the reservoir along with filling it with distilled water.
This
combination has kept my lungs clear for years with no problems.
In
addition, the small amount of colloidal silver in the CPAP reservoir also keeps
the reservoir, hose, and mask completely free from any fungal development.”
A lady who suffers from sleep apnea wrote:
“I
have sleep apnea. And when I go to sleep, I use a
machine to help me breath thru the night. I add colloidal silver to the
water reservoir.
Since
I started using it in the water my sinuses have cleared up. I sleep much better
and do not struggle to breath now.”
An individual on the GoldIsMoney2.com website wrote:
“I
am using Electrically Isolated Silver [i.e., ionic silver – ED] in my CPAP
machine's water reservoir (distilled water w/ 1 Tablespoon of EIS).
…My
dentist complimented on how healthy my mouth has been lately. I've been with
him for decades and always had trouble with gingivitis.
Since
I've been using EIS [i.e., ionic silver – ED] almost daily
for the last several years all my gum issues have disappeared.”
In the above case, only one tablespoon full of colloidal
silver is added to the CPAP machine’s water reservoir, and a rather pleasant
“side effect” was noticed, i.e., no more gingivitis.
If you find that “side effect” interesting, you might want
to read the article “Colloidal
Silver Cures Teeth and Gum Problems.”
Here’s another anecdotal account, this time from the online
archives of the Silver List:
“I
also use a CPAP with a heated humidifier. I found that after 2 weeks
the tubes would start to get a mildew smell and I would have to soak
everything in vinegar to get rid of it.
I
then began to put colloidal silver into the humidifier about 2 years ago
and I never have to clean the tubes anymore as they no longer get mildew
in them.
In
fact after a couple months of running colloidal silver through the system I can
only guess that all the tubes became coated with silver particles as I no
longer have to put colloidal silver in the humidifier any more.”
Here’s another anecdotal account, this one from a Yahoo
Groups colloidal silver forum:
“Just
a bit of information you may be interested in.
I was diagnosed with Asbestosis (not cancerous) a few years ago. The medication (3 different puffers up to 4
times a day) was improving me very slowly.
Then
I put colloidal silver in my CPAP machine for 2 nights then nothing for 2
weeks. Then 2 nights again. Now I just do the silver 2 nights about every
4 weeks and no other medication.
I'm
not 100% but I'm a hell of a lot better than I was. I don't like to post on public forums, but if
you find this information useful feel free to use it, BUT NOT my full name!
thanks, Brian”
Notice the individual used very small amounts of colloidal
silver, and only periodically, in his
CPAP machine. His improvement was
gradual. But he was able to wean himself off all medications for his asbestosis
lung problems by doing so. Very
interesting!
Here’s quite an interesting account from a person who didn’t use colloidal silver in his CPAP
machine, but instead used silver dimes (i.e., pre-1965 dimes were made of 90%
silver):
“For
years, I have placed one silver American Eagle into our 5-gallon water-cooler
jugs that I refill from the filter on my tap. It keeps slime from forming in
the bottles AND in the cooler.
I also put silver dimes in my CPAP humidifier with the same result. My mother tells me that, as a child in the '20s, they would put a silver coin in their milk bottles to make the milk keep longer.”
I also put silver dimes in my CPAP humidifier with the same result. My mother tells me that, as a child in the '20s, they would put a silver coin in their milk bottles to make the milk keep longer.”
Of course, that works because the silver dimes leach very
small amounts of silver ions into the water, on a gradual basis. Here’s one
more very brief account:
“I use colloidal silver in the
distilled water reservoir of my CPAP machine, to keep the water pure and to
prevent microbial growth.”
So, that's what people tell me they're doing. And they claim
they have no problems, so far.
And that’s probably because adding an ounce or two of
colloidal silver to a 14 ounce reservoir dilutes the silver sufficiently so
that the lungs can easily clean themselves of any residual silver.
Erring on the Side of
Caution
However, considering the lack of good, solid clinical information about inhaling aerosolized colloidal silver into the lungs for hours at a time each day and doing so for days, weeks or even months on end, I think it's best to err on the side of caution.
However, considering the lack of good, solid clinical information about inhaling aerosolized colloidal silver into the lungs for hours at a time each day and doing so for days, weeks or even months on end, I think it's best to err on the side of caution.
Until better information becomes available, I’d personally
either not do it at all, or only do it periodically
rather than every single day. Or at least stick to the smallest amount of
colloidal silver needed to keep the water reservoir of the CPAP machine from
becoming fouled with microbial growth.
I say this because people once thought nebulizing colloidal silver into the lungs through a medical nebulizer was perfectly safe to do on a daily basis. There's even a colloidal silver generator manufacturer who supplies a medical nebulizer with his generator so you can nebulize the colloidal silver every day.
However, when clinical studies on animals were later conducted by independent researchers, it was demonstrated that after 90 days of inhaling silver particles on a daily basis, the particles began to accumulate in the animal’s lungs.
I say this because people once thought nebulizing colloidal silver into the lungs through a medical nebulizer was perfectly safe to do on a daily basis. There's even a colloidal silver generator manufacturer who supplies a medical nebulizer with his generator so you can nebulize the colloidal silver every day.
However, when clinical studies on animals were later conducted by independent researchers, it was demonstrated that after 90 days of inhaling silver particles on a daily basis, the particles began to accumulate in the animal’s lungs.
Over time, this resulted in lesions in the lungs, and
ultimately decreased air flow. Read the details here: Using Colloidal
Silver in a Nebulizer
So, while I personally have no problem with inhaling colloidal silver into the lungs through a nebulizer when I have an upper respiratory infection, it's definitely NOT something I'd do on a daily basis for weeks and months on end.
So, while I personally have no problem with inhaling colloidal silver into the lungs through a nebulizer when I have an upper respiratory infection, it's definitely NOT something I'd do on a daily basis for weeks and months on end.
I’d only do it periodically, for a few days in a row, whenever I have an upper respiratory
infection, because I don't want silver particles accumulating in my lungs,
however rare that might be.
The lungs are wonderful contraptions; under normal
circumstances they're very effective at self-cleaning, which is to say, at
keeping themselves from being coated with dust, pollution and other substances
that you breathe in on a regular basis.
But if you overwhelm the lung's mechanism for self-cleaning
by breathing in too much of a particular foreign substance (such as silver, for
example), hours-a-day, day-in and day-out for long periods of time, then it
appears based on the latest animal research that you could possibly end up with
silver accumulating in the lungs, and even incur lung damage over time.
So once again, it’s a situation where moderation in all things should be the watchword. I’m not telling anyone what to do. I know many people tell me they’ve been using
colloidal silver in their CPAP machines for years. I’m just setting forth the facts as I
understand them, and letting people make their own decisions.
To learn more about using colloidal silver in the lungs and
sinuses, see:
Make Your Own
Colloidal Silver for Pennies
However, it’s quite
literally one of the most expensive and heavily marked-up nutritional
supplements in existence.
Health food store owners,
for example, often charge as much as $20-$30 for a tiny four-ounce
bottle. Yet the cost to manufacture four ounces of colloidal silver
is about 12 cents. Yes, I said twelve cents.
Of course, people
are willing to pay through the nose for colloidal silver, since it’s safe and
natural, and works so well against germs, mold, fungus, and even viruses.
But thankfully,
there’s no need to pay such exorbitant prices for colloidal silver, when you
can make your own, quickly and easily, in the comfort and privacy of your own
home, for about 36 cents a quart.
Yes, you can make it yourself for its actual cost, and altogether skip the sky-high mark-ups charged by health food stores!
Yes, you can make it yourself for its actual cost, and altogether skip the sky-high mark-ups charged by health food stores!
If you’re
interested in learning how to make your own high-quality colloidal silver at
home, for about 36 cents a quart, here are some additional short
articles you might want to take a look at:
Meanwhile, I’ll be back next week with another great article on
colloidal silver….
Yours for the safe, sane and responsible
use of colloidal silver,
Helpful Links:
Important Note and
Disclaimer: The contents of this Ezine have not been
evaluated by the Food and Drug Administration.
Information conveyed herein is from sources deemed to be accurate and
reliable, but no guarantee can be made in regards to the accuracy and
reliability thereof. The author, Steve
Barwick, is a natural health journalist with over 30 years of experience
writing professionally about natural health topics. He is not
a doctor. Therefore, nothing stated in
this Ezine should be construed as prescriptive in nature, nor is any part of
this Ezine meant to be considered a substitute for professional medical
advice. Nothing reported herein is
intended to diagnose, treat, cure or prevent any disease. The author is simply reporting in
journalistic fashion what he has learned during the past 17 years of
journalistic research into colloidal silver and its usage. Therefore, the information and data presented
should be considered for informational purposes only, and approached with
caution. Readers should verify for
themselves, and to their own satisfaction, from other knowledgeable sources
such as their doctor, the accuracy and reliability of all reports, ideas,
conclusions, comments and opinions stated herein. All important health care decisions should be
made under the guidance and direction of a legitimate, knowledgeable and
experienced health care professional.
Readers are solely responsible for their choices. The author and publisher disclaim
responsibility and/or liability for any loss or hardship that may be incurred
as a result of the use or application of any information included in this
Ezine.
Copyright
2016 | Life & Health Research Group, LLC | PO Box 1239 | Peoria AZ
85380-1239 | All rights reserved.
Posts
