How the World’s #1 Best-Selling Colloidal Silver Generator Compares to All the Rest

You’ve probably wondered what the difference is between the best-selling Micro-Particle Colloidal Silver Generator and the colloidal silver generators offered by other companies.

Naturally, that’s a very valid question.  And the answer is quite eye-opening, particularly if you value your health and well-being, and only want to put the most high-quality and astonishingly effective colloidal silver possible into your body.  Here’s what I’m talking about…

Hi, Steve Barwick here, for TheSilverEdge.com...

The main difference between a conventional colloidal silver generator and the best-selling Micro-Particle Colloidal Silver Generator is the size of the silver particles being produced.

Conventional colloidal silver generators produce staggeringly large silver particles that can range in size as much as 200 nm to 1,000 nm, or even larger. 

But the Micro-Particle Colloidal Silver Generator from The Silver Edge can produce silver particles as low as .8 nm – yes, a fraction of a single nanometer!  (See laboratory micrograph below.)

In other words, conventional colloidal silver generators produce silver particles that are 200 to 1,000 times larger (or more) than the silver particles produced by the best-selling Micro-Particle Colloidal Silver Generator!

As I’ll demonstrate conclusively for you in just a moment, this means micro-particle colloidal silver is hundreds of times more bioavailable AND more bio-effective than the colloidal silver produced by any of the conventional colloidal silver generators on the market today.

And as you’ll see, even the FDA agrees with me on the issue of silver particle size and bioavailability, as their most recent study (which I’ll tell you more about, below) amply demonstrates.    

The Silver Particle Size Difference

But first, I’d like you to see all of this for yourself, documented directly below in the independent laboratory micrograph images of two different batches of colloidal silver taken at an independent laboratory through a multi-million dollar Transmission Electron Microscope. 

These micrographs give you a stunning visual comparison of the tiny silver micro-particles produced by the Micro-Particle Colloidal Silver Generator, versus the grossly overly-large and agglomerated silver particles produced by a conventional colloidal silver generator.

Micro-Particle Colloidal Silver 

.8 nm in size – a fraction of 

a single nanometer!

You might have to put on your reading glasses and look very closely at the micrograph to the left to see the hundreds of thousands of tiny, submicroscopic silver micro-particles in a single drop of colloidal silver, produced by a Micro-Particle Colloidal Silver Generator.

It’s like looking at the billions of tiny stars in the Milky Way Galaxy.  That’s because even though these submicroscopic .8 nm silver micro-particles have been magnified a whopping 175,000x most of them are still far smaller than a pinprick to the naked eye.

But in the second micrograph directly below, you’ll have no problem at all seeing the oversized silver particles ranging in size between 200 nm to 1,000 nm (or even larger).

Conventional colloidal silver 

particles between 200 and 

1,000 nm -- far too large 

to be bioavailable!

These were produced by a conventional colloidal silver generator and are so large, in comparison, that they only needed to be magnified by 50,000x instead of 175,000x to see them and photograph them through the microscope.

As you can see, the silver particles from a conventional colloidal silver solution are HUGE by comparison to those from a Micro-Particle Colloidal Silver Generator.

(If you have trouble viewing the micrographs, click here to be taken to a web page where you can see them a little better.)

Not only are these conventional colloidal silver particles huge, but they’re agglomerated, to boot. 

This means rather than maintaining silver particle individuality like the silver micro-particles in the first micrograph above, these silver particles are so large and so poorly formed they’ve bonded together into what can only be described as “clumps” or “blobs.” 

Clearly, the difference between colloidal silver produced with a Micro-Particle Colloidal Silver Generator and colloidal silver produced with a conventional colloidal silver generator is like the difference between night and day.

But again, you can only tell the difference when you look at it under a powerful, multi-million dollar Transmission Electron Microscope.  So most people using colloidal silver produced by a conventional colloidal silver generator have no idea what poor quality colloidal silver they’re actually making and consuming!

What’s So Darned Important

About Silver Particle Size?

Of course, the size of the silver particles in any colloidal silver solution is critical, because clinical research clearly demonstrates that the smaller your silver particles are, the more bioavailable they are.

This means smaller silver particles are easier for your body to absorb, distribute, utilize for healing, and afterwards to expel through the normal channels of elimination. 

On the other hand, the larger your silver particles are, the more difficult it is for your body to absorb, distribute and utilize them for healing. 

In fact, larger silver particles are treated by the body much as eating dirt would be treated, i.e., they go in one end and out the other, and sometimes even lodge in the bowels and intestines.

The body considers larger silver particles to be of no nutritional value, so they’re not efficiently absorbed and distributed throughout the cells, tissues and organs where they would otherwise be able to work their healing magic against pathogens. 

But the body is quite easily able to absorb, distribute and utilize ultra-small, submicroscopic silver micro-particles such as those produced with a Micro-Particle Colloidal Silver Generator from The Silver Edge.

Indeed, the body sees these uncommonly small colloidal silver micro-particles as “nutrients” (which they are) and utilizes them accordingly, sending them into the cells, tissues and organs, and afterwards expelling them just as it would any other nutrient once it’s been utilized. 

The FDA Agrees

Believe it or not, the FDA’s own studies have documented the fact that larger silver particles are more difficult for the body to absorb, distribute and utilize, while smaller silver particles are much easier for the body to absorb, distribute and utilize. 

In fact, according to the FDA’s National Center for Toxicological Research Annual Report for 2011, in animal studies they conducted, there was only limited absorption of silver particles when they were relatively large.

However, as the silver particle size decreased, absorption increased proportionately.  According to the FDA report:

“Silver nanoparticles are highly effective antibacterial agents, and this property of silver nanoparticles is being exploited in an expanding number of commercial and consumer products…

…During fiscal year 2011, Division investigators examined the effect of the size of silver nanoparticles on the bioavailability, tissue distribution, metabolism, and clearance in rats.

The results indicated that, after oral administration, only limited absorption occurs, with the extent of absorption increasing as the size of the [silver] particles decreased.”

-- FDA National Center for Toxicological Research Annual Report, 2011, page 19

So according to the FDA, “bioavailability, tissue distribution, metabolism, and clearance” of silver particles is almost completely dependent upon…drum roll, please…small particle size.

In other words, the FDA has demonstrated that smaller silver particles are more easily absorbed, distributed throughout the body, utilized and afterwards eliminated.  But larger silver particles are less easily absorbed, distributed, utilized and eliminated.

So obviously, for maximum bioavailability you want the smallest sized silver particles possible. 

That’s what makes the Micro-Particle Colloidal Silver Generator so uniquely valuable and beneficial compared to other colloidal silver generators – it produces silver particles as low as .8 nm, meaning a fraction of a single nanometer. 

These are uncommonly small silver particles you just can’t produce with any conventional colloidal silver generator on the market today!

Smaller Silver Particles

Are Far More Effective, Too!

What’s more, in addition to smaller silver particles being far more bioavailable, numerous clinical studies have demonstrated they’re also far more effective against disease-causing pathogens such as viruses, “stealth bacteria” like mycoplasmas, and antibiotic-resistant bacteria like MRSA. 

For example, researchers behind the famous HIV study, published in the prestigious journal Nanobiotechnology, found that silver particles larger than 10 nm in size were unable to effectively bond with the host cell of the AIDS virus and disrupt its ability to replicate.

But silver particles smaller than 10 nm had no problem at all bonding with the host cell, and preventing the AIDS virus from replicating and spreading!

Researchers in Czechoslovakia later demonstrated that silver particles above 25 nm in size were not able to effectively kill the deadly MRSA pathogen, whereas silver particles smaller than 25 nm killed this pathogen handily.

And Dr. Darryl See, M.D., former co-director of the Chronic Fatigue Syndrome and Fibromyalgia Clinic at the University of California at Irvine found that his patients suffering from “incurable” chronic degenerative diseases caused by underlying mycoplasmas infections experienced dramatic improvement from colloidal silver…

…but only if the particle size was small enough to penetrate deep into the cells and tissues of the human body where these insidious “stealth pathogens” are known to hide.  (See Arthritis and Infections: The Hidden Link, Health Sciences Institute, Vol. 2, #10, April 1998.)

So experts agree that silver particle size is extremely important, both if you want to achieve maximum bioavailability of the ingested silver particles, as well as maximum bio-effectiveness against difficult-to-eradicate disease-causing pathogens. 

In short, the tiny, submicroscopic size of the silver particles is what makes the colloidal silver solutions produced by the best-selling Micro-Particle Colloidal Silver Generator far superior to colloidal silver solutions produced by conventional generators.

The Speed v/s Quality Difference

Most colloidal silver generator manufacturers believe their customers want speedy batches of colloidal silver. 

That’s why they almost universally manufacture colloidal silver generators that produce batches of colloidal silver in half-an-hour to an hour or so. 

Unfortunately, to accomplish this they have to use excessively high electrical currents that quickly “blow” silver particles off the silver electrodes.

In doing so, they sacrifice quality and small particle size in favor of production speed. Indeed, as you’ve already seen in the above laboratory micrographs, the result of speedy batches is inevitably the production of grossly overly-large silver particles.

But by making your own colloidal silver with a high-quality Micro-Particle Colloidal Silver Generator from The Silver Edge, the tiny silver micro-particles trickle slowly and gently off the silver electrodes over a period of three hours.

They’re never “blown” quickly off of the electrodes by excessive electrical current, as occurs with most conventional colloidal silver generators.

And because the silver particles are so small, and each one carries its own singular electrical charge, there’s virtually zero agglomeration (i.e., bonding of silver particles into “blobs” or “clumps”). 

Over the course of three hours, literally billions of these tiny, submicroscopic silver micro-particles are produced in a typical one-quart batch, giving you one of the most high-quality colloidal silver solutions that can be made through any process, anywhere in the world!

You may have to wait a little bit longer to make a batch of high-quality micro-particle colloidal silver (i.e., three hours for a full, one-quart batch), but you get the most bio-available and bio-effective colloidal silver possible.

One More Crucial

(and Mind-Blowing) Benefit…

Unlike any other colloidal silver generator on the market today, the Micro-Particle Colloidal Silver Generator includes a built-in air bubbler mechanism that constantly bubbles air into the colloidal silver solution during the entire colloidal silver-making process. 

Here’s why:  Among its many qualities, silver is known to be an oxygen sponge. It has the capacity to carry ten times its atomic weight in molecular oxygen. 

This is crucial to understand, because once enough molecular oxygen is concentrated onto the surface of a silver particle through a process known as oxygen adsorption, it’s then converted to nascent oxygen.

Nascent oxygen, in turn, is able to destroy the enzymes all infectious microorganisms depend upon for catalytic function.  In other words, by destroying these enzymes, the pathogen’s ability to function collapses. 

This process is called catalytic oxidation, and it’s similar to the way hydrogen peroxide kills pathogens.  After a pathogen is struck by a burst of nascent oxygen from a nearby silver particle, its function is quite literally crippled, and soon afterwards it expires. 

Indeed, catalytic oxidation is the first of three known mechanisms utilized by silver to kill infectious microorganisms.  Here are the three:

1.)  Catalytic oxidation – a powerful burst of nascent oxygen from the surface of the silver particle stuns and disables the pathogen’s defenses, removing needed hydrogen atoms from the surface membrane and causing sulfur atoms to bond in such a way that respiration is blocked and the pathogen ultimately expires.

2.)  Reaction with the cell membrane – if the pathogen remains alive in spite of the intense damage caused by the oxygen burst, the silver ions themselves then attach to the surface membrane of the pathogen, further impairing cellular respiration and blocking its energy transfer system so repair cannot take place.

3.)  Binding with the DNA – The silver then penetrates the cell wall of the pathogen and binds to its DNA, further preventing it from replicating and spreading throughout the body.

It’s this “one-two-three punch” that makes colloidal silver so effective against infectious microorganisms of every sort, whether bacterial, viral or fungal.  The first mechanism above does the vast majority of the damage to pathogens, while the second and third mechanism help “mop up” anything that’s survived.

But here’s the key:  In order to obtain the benefits of silver’s first and primary mechanism for defeating infectious microorganisms – i.e., catalytic oxidation -- you have to provide ample air to the silver particles during the course of the colloidal silver-making process. 

Otherwise, your silver particles cannot concentrate molecular oxygen onto their surfaces, convert it to nascent oxygen in sufficient quantities, and then release a crippling “oxygen burst” in the presence of pathogens. 

As much as 50% or more of colloidal silver’s effectiveness against pathogens depends upon this process of catalytic oxidation.  In other words, it depends upon the amount of molecular oxygen each silver particle is able to adsorb and concentrate to its surface, and then convert to nascent oxygen for later use against pathogens.

That’s why the Micro-Particle Colloidal Silver Generator – unlike any other colloidal silver generator on the planet – includes a built-in bubbler system (see image below) so that every one of the tens of billions of tiny silver micro-particles produced during a typical batch are charged to the hilt with raw molecular oxygen.

This one factor alone means the Micro-Particle Colloidal Silver Generator is able to produce colloidal silver that’s at least 50% more effective than the colloidal silver produced by conventional colloidal silver generators.

Combine that with the profound benefits of being able to produce uncommonly small and highly bioavailable and bio-effective submicroscopic silver particles as low as .8 nm, and you quite literally have the ability to produce some of the most high-quality colloidal silver on the planet any time you need it! 

Unbelievable Ease of Operation

If you’re concerned about ease of operation, have no fear.  The Micro-Particle Colloidal Silver Generator is purposely constructed for ease of operation.  

In fact, if you can use a coffee pot, you can easily use a Micro-Particle Colloidal Silver Generator. 

That’s because, unlike conventional colloidal silver generators, there are no complicated dials and buttons to set.  No switches to throw.  No alligator clips to connect.  No electrical wires running all over the place.  Nothing. 

You just plug the two silver rods into their jacks in the bottom of the generator box (which takes about two seconds), set the generator box on top of a one-quart glass jar filled with pure, steam-distilled water, and plug it in to a standard electrical outlet.  It’s that easy. 

And if you want to use the handy wall-timer that’s included with every Micro-Particle Colloidal Silver Generator (see photo), you can just “set it and forget it.”  You don’t even have to be there when your batch of colloidal silver is finished “brewing.”  It will turn off by itself after three hours of running time, and be there for you when you return.

We have 80-plus year old grandmas using this generator, and they all love it.  In fact, the grown daughter of one 86-year old Micro-Particle Colloidal Silver Generator owner recently wrote us to say:

“I’m writing this for my mother who’s 86 years old and has no computer and wanted me to let you know the following:

She would not think of giving up her Micro-Particle Colloidal Silver Generator or her colloidal silver. 

Mom wanted you to know that she used to get pneumonia at least twice a year until she began using this colloidal silver. She has not had any sign of pneumonia in five years and no problems with her health.

She also uses it as a disinfectant throughout the house. She uses it as a mouth wash. She has had no sinus problems this year since she uses it as nose drops (Oklahoma is notorious for allergies and sinus problems!)

Many of our church members are now asking Mom for a bottle of colloidal silver for their families, and they ask again when they run out, so Mom tries to keep plenty of it made up and on hand at a moment’s notice. She considers this as something she can do to help others when they have a need and always gives it to them as a gift.”

-- N.O., Oklahoma

The Bottom Line…

The bottom line is this:  If you truly value your health and well-being, and only want to put the very best and most effective colloidal silver possible into your body, then the new Micro-Particle Colloidal Silver Generator from The Silver Edge is exactly what you’ve been looking for.

When quality counts most, this is the colloidal silver generator you want to own, particularly when you consider the facts that:

a.)  ultra-small silver particle size is the key factor in determining whether or not your body can absorb, distribute and utilize colloidal silver effectively for maximum health and well-being, and...

b.)  ultra-small silver particle size is the key factor in determining whether or not the colloidal silver you’ve ingested can get deep into the cells and tissues where disease-causing “stealth pathogens” like to hide, and…

c.)  ultra-small silver particle size is the key factor in determining whether or not the colloidal silver you ingest can be properly excreted from the body after being utilized.

In other words, the particle size of the colloidal silver solutions you produce largely determines how bio-available the silver is, and therefore how bio-effective it will be in stopping infections and healing illnesses and disease.

The Micro-Particle Colloidal Silver Generator from The Silver Edge allows you to produce the smallest and most effective silver particles possible, as low as .8 nm in size – a fraction of a single nanometer! 

And each silver particle produced is highly charged with pathogen-destroying molecular oxygen.  No other colloidal silver generator can make this claim. 

No Risk to You Whatsoever!

Unlike many conventional colloidal silver generators which are so poorly designed and which use such low-quality materials they “burn out” from use within six or eight months, the new Micro-Particle Colloidal Silver Generator has been designed and built to last for a LIFETIME.  

It's so sturdily constructed, you'll literally end up willing it to your children someday, if you don't buy them one first after you’ve purchased your own!  Indeed, we have customers who have owned (and used) their Micro-Particle Colloidal Silver Generators for over 15 years without a hitch!

What’s more, every new Micro-Particle Colloidal Silver Generator comes with a full 30-day, no-questions-asked, “use-it-for-yourself and make-up-your-own-mind” money-back guarantee, AND a one-year warranty against defects in parts and workmanship.

So there's no risk to you whatsoever.  

You actually get to use the new Micro-Particle Colloidal Silver Generator every single day for a full 30 days to prove it's everything we say it is.

Think About This: If you make a one-quart batch of high-quality micro-particle colloidal silver each day during your 30-day risk-free money-back guarantee period, you'll have 30 quarts of colloidal silver stocked up!

That's the equivalent of 240 of those little 4-oz. bottles of colloidal silver sold in your local health food store for between $20 and $30 each!

In other words, you could make well over $4,800 (honest...do the math!) worth of colloidal silver while deciding whether or not to keep your new Micro-Particle Colloidal Silver Generator!

And if you're not satisfied for any reason, just return your generator, the timer, the silver wire and the plastic zipper pouch carrying case within 30 days for a refund of the full purchase price!

Save $100 By Acting Now!

A brand new Micro-Particle Colloidal Silver Generator from The Silver Edge usually costs $339.95, and I believe it’s a screaming bargain at that price, especially when you consider the fact that your very first one-quart batch of micro-particle colloidal silver costs you less than 36 cents to make. 

In other words, your first few one-quart batches of colloidal silver pays for the entire cost of your new generator, especially when you consider the fact that those tiny little four-ounce bottles of colloidal silver being sold in health food stores cost an average of $28 apiece. 

Yet with your new Micro-Particle Colloidal Silver Generator from The Silver Edge, you can make eight of those little four-ounce bottles (i.e., one quart) at a time, for less than the cost of pocket change.

What’s more, once your first few batches have paid for the entire cost of your generator, each subsequent one-quart batch you make is practically free. 

After all, your only cost is the steam-distilled water (about a dollar a gallon at Walmart), and the pure .999 fine silver wire which has to be replaced about once a year for around $35 (depending upon the cost of silver on the open market).

So $339.95 is not only a fair price, but an astonishing bargain considering the fact that you’ll be able to make hundreds upon hundreds of one-quart batches of some of the highest-quality colloidal silver in the world for just pennies per batch.

But you’re not going to pay anywhere near $339.95 for your new Micro-Particle Colloidal Silver Generator.  That’s because, for the next 15 days only you’ll save a whopping $100 of the regular price. 

That’s right!  For the next 15 days only, during this special introductory savings offer, you can snag a brand new Micro-Particle Colloidal Silver Generator for only $239.95 – that’s a bona-fide savings of $100! 

Lots of Other Valuable Goodies!

Plus, along with your new generator and the $100 savings, you’ll also receive a 16-page printed Operating Instructions Guide with simple step-by-step instructions, and loads of handy tips for making, storing and using colloidal silver. 

AND, in case you’re one of those people who prefer visual instructions from a real-life person, you’ll also receive a full-color Operating Instructions DVD featuring a pretty model demonstrating step-by-step how simple it is to make your first batch of micro-particle colloidal silver with your new Micro-Particle Colloidal Silver Generator. 

But that’s not all.  You also get a FREE copy of my 16 page report, “The Most Frequently Asked Questions & Answers About Making and Using Colloidal Silver,” so you’ll be up-to-speed your very first day. 

You also get a FREE handy “zipper pouch” carrying case so you can easily take your new generator and supplies with you wherever you go…vacations, camping, travel, and more. 

And finally, you get a set of pure, .999 fine silver wire for your generator, guaranteed to last you for over a year (even if you make colloidal silver several times a week). 

Indeed, you’ll be able to make well over $24,000 worth of high-quality micro-particle colloidal silver from this single set of pure .999 fine silver wire, which is to say, over 3,200 ounces which is over 100 quarts!  (See this web page for more information.)

It’s astonishing, I know, but it’s absolutely true. 

Your ability to make literally tens of thousands of dollars worth of colloidal silver from a single set of pure, .999 fine silver wire is one of the many profound benefits of owning a new Micro-Particle Colloidal Silver Generator from The Silver Edge!

Order Now and Save BIG!

To order a brand new Micro-Particle Colloidal Silver Generator and save $100 off the regular price (next 15 days only!), use the “Order Online” button on this web page. 

Or call The Silver Edge today, toll-free at:  1-888-528-0559 (Monday through Friday, 8am to 5pm, Arizona time.) 

Our friendly Customer Service Representatives will be happy to answer all of your questions and take your order.  And once you place your order, your brand new Micro-Particle Colloidal Silver Generator will usually arrive within a week!

There’s simply no longer any reason to continue paying $25 to $30 for those tiny, four-ounce bottles of colloidal silver sold through health food stores or online vendors. 

Instead, start experiencing the profound benefits of being able to make your own high-quality, oxygen-infused, micro-particle colloidal silver for less than 36 cents a quart with the world’s #1 best-selling colloidal silver generator!

You’ll be glad you did, I promise…

Yours for the safe, sane and responsible use of colloidal silver,

Steve Barwick, President
The Silver Edge

P.S. – One Final Thought…It’s important to note that The Silver Edge is not some fly-by-night internet company. We're a solid company with over 16 years behind us of successful service to the public, supplying the world's finest home colloidal silver generators.

We have a full-time Tech Support staff you can call during normal business hours whenever you might have a question.  And we have a full-time Customer Service staff you can call anytime you need, as well (i.e., Monday through Friday, during normal business hours, for both).  

And if you prefer to communicate by email, we also give you the email address to both the Tech Support Department and the Customer Service Department.

And this contact information is printed on a big foil label right on the top of your new Micro-Particle Colloidal Silver Generator, so you’ll never lose it.

This means you’re never left in the dark when you own a new Micro-Particle Colloidal Silver Generator from The Silver Edge.  You’ll always have access to the experts at The Silver Edge.

In short, we've been around for a long time, and we plan to be around for a lot longer.

The Silver Edge is a company you can trust, and the new Micro-Particle Colloidal Silver Generator is simply the finest and most high-quality colloidal silver generator on the market today...

...which is why it's been the #1 best-selling colloidal silver generator in the world for over seven years running.

P.P.S. -- Read What These Top Experts Say About the Micro-Particle Colloidal Silver Generator from The Silver Edge:

“I'm often asked which colloidal silver generator I recommend. Hands down, I recommend the Micro-Particle Colloidal Silver Generator from my friend Steve Barwick at Silver Edge…

I've touted the benefits of pure micro-particle colloidal silver for years to anyone that would listen.

Frankly, it's the best way I know to quickly heal cuts, scrapes, sores and burns... treat a host of common illnesses such as colds, flus and sore throats... as well as kill nasty germs on cutting boards, kitchen counters, tooth brushes and even your pet's water bowl.

But most importantly is how it can protect you from the deadly pathogen MRSA that has become resistant to almost all known prescription antibiotics.

Having a colloidal silver generator as part of your first aid kit just makes sense... especially if you ever find yourself in an emergency with no access to a doctor or hospital.” 

-- Michael Cutler, M.D., Editor, Easy Health Options 

“The bottom line is that for colloidal silver to effectively fight pathogens, you must use micro-particle silver rather than conventional colloidal silver or silver protein products…

You can actually make your own micro-particle colloidal silver in your own home. In fact, there’s one colloidal silver generator on the market today -- the Micro-Particle Colloidal Silver Generator from a company called The Silver Edge -- that will make colloidal silver with such uncommonly small silver particles, it requires a multi-million dollar Transmission Electron Microscope operating at 175,000x magnification just to see them.

This generator allows you to make the most powerful, and highly bioavailable form of colloidal silver right in your own home. And you can make it for pennies…

Having a Micro-Particle Colloidal Silver Generator on hand allows you to protect your entire family – and probably your friends and neighbors as well – for just pennies.” 

-- Donald S. McAlvany, The McAlvany Intelligence Advisor, October 2013

                                                                                                 

Important Note and Disclaimer:  The contents of this Ezine have not been evaluated by the Food and Drug Administration.  Information conveyed herein is from sources deemed to be accurate and reliable, but no guarantee can be made in regards to the accuracy and reliability thereof.  The author, Steve Barwick, is a natural health journalist with over 30 years of experience writing professionally about natural health topics.  He is not a doctor.  Therefore, nothing stated in this Ezine should be construed as prescriptive in nature, nor is any part of this Ezine meant to be considered a substitute for professional medical advice.  Nothing reported herein is intended to diagnose, treat, cure or prevent any disease.  The author is simply reporting in journalistic fashion what he has learned during the past 17 years of journalistic research into colloidal silver and its usage.  Therefore, the information and data presented should be considered for informational purposes only, and approached with caution.  Readers should verify for themselves, and to their own satisfaction, from other knowledgeable sources such as their doctor, the accuracy and reliability of all reports, ideas, conclusions, comments and opinions stated herein.  All important health care decisions should be made under the guidance and direction of a legitimate, knowledgeable and experienced health care professional.  Readers are solely responsible for their choices.  The author and publisher disclaim responsibility and/or liability for any loss or hardship that may be incurred as a result of the use or application of any information included in this Ezine. 

Copyright 2014 | Life & Health Research Group, LLC | PO Box 1239 | Peoria AZ 85380-1239 | All rights reserved.