You’ve probably
wondered what the difference is between the best-selling Micro-Particle
Colloidal Silver Generator and the colloidal silver generators offered by other
companies.
Naturally, that’s a very
valid question. And the answer is quite
eye-opening, particularly if you value your health and well-being, and only
want to put the most high-quality and astonishingly effective colloidal
silver possible into your body. Here’s
what I’m talking about…
The main difference between a conventional colloidal silver
generator and the best-selling Micro-Particle Colloidal Silver Generator is the
size of the silver particles being produced.
Conventional colloidal silver generators produce
staggeringly large silver particles that can range in size as much as 200 nm to
1,000 nm, or even larger.
But the Micro-Particle Colloidal Silver Generator from The
Silver Edge can produce silver particles as low as .8 nm – yes, a fraction of a single nanometer! (See laboratory micrograph below.)
In other words, conventional colloidal silver generators
produce silver particles that are 200 to 1,000 times larger (or more) than the silver particles produced by the
best-selling Micro-Particle Colloidal Silver Generator!
As I’ll demonstrate conclusively for you in just a moment,
this means micro-particle colloidal silver is hundreds of times more bioavailable AND more bio-effective than the
colloidal silver produced by any of
the conventional colloidal silver generators on the market today.
And as you’ll see, even
the FDA agrees with me on the issue of silver particle size and
bioavailability, as their most recent study (which I’ll tell you more about, below)
amply demonstrates.
The Silver Particle
Size Difference
But first, I’d like you to see all of this for yourself, documented
directly below in the independent laboratory micrograph images of two different
batches of colloidal silver taken at an independent laboratory through a
multi-million dollar Transmission Electron Microscope.
These micrographs give you a stunning visual comparison of the
tiny silver micro-particles produced by the Micro-Particle Colloidal Silver
Generator, versus the grossly overly-large and agglomerated silver particles
produced by a conventional colloidal silver generator.
 |
Micro-Particle Colloidal Silver
.8 nm in size – a fraction of
a single nanometer!
|
You might have to put on your reading
glasses and look very closely at the micrograph to the left to see the hundreds
of thousands of tiny, submicroscopic silver micro-particles in a single drop of colloidal silver, produced
by a Micro-Particle Colloidal Silver Generator.
It’s like looking at the billions of tiny
stars in the Milky Way Galaxy. That’s because
even though these submicroscopic .8 nm silver micro-particles have been
magnified a whopping 175,000x most of them are still far smaller than a pinprick to the naked
eye.
But in the second micrograph directly below, you’ll have no
problem at all seeing the oversized silver particles ranging in size between
200 nm to 1,000 nm (or even larger).
 |
Conventional colloidal silver
particles between 200
and
1,000 nm -- far too large
to be bioavailable!
|
These were produced by a conventional colloidal silver generator
and are so large, in comparison, that they only needed to be magnified by 50,000x
instead of 175,000x to see them and photograph them through the microscope.
As you can see, the silver particles from a conventional
colloidal silver solution are HUGE by comparison to those from a Micro-Particle
Colloidal Silver Generator.
(If you have trouble viewing the micrographs,
click here to be taken to a
web page where you can see them a little better.)
Not only are these conventional colloidal silver particles
huge, but they’re agglomerated, to
boot.
This means rather than maintaining silver particle individuality like the silver
micro-particles in the first micrograph above, these silver particles are so
large and so poorly formed they’ve bonded together into what can only be
described as “clumps” or “blobs.”
Clearly, the difference between colloidal silver produced with a Micro-Particle
Colloidal Silver Generator and colloidal silver produced with a conventional
colloidal silver generator is like the difference between night and day.
But again, you can only tell the difference when you look at
it under a powerful, multi-million dollar Transmission Electron Microscope. So most people using colloidal silver produced
by a conventional colloidal silver generator have no idea what poor quality colloidal silver they’re actually making
and consuming!
What’s So Darned
Important
About Silver Particle
Size?
Of course, the size of the silver particles in any colloidal
silver solution is critical, because clinical
research clearly demonstrates that the smaller
your silver particles are, the more bioavailable
they are.
This means smaller silver particles are easier for your body to absorb,
distribute, utilize for healing, and afterwards to expel through the normal channels of elimination.
On the other hand, the larger
your silver particles are, the more difficult
it is for your body to absorb, distribute and utilize them for healing.
In fact, larger silver particles are treated by the body
much as eating dirt would be treated, i.e., they go in one end and out the other,
and sometimes even lodge in the bowels and intestines.
The body considers larger silver particles to be of no
nutritional value, so they’re not efficiently absorbed and distributed
throughout the cells, tissues and organs where they would otherwise be able to work
their healing magic against pathogens.
But the body is quite easily able to absorb,
distribute and utilize ultra-small, submicroscopic silver micro-particles such
as those produced with a Micro-Particle Colloidal Silver Generator from The
Silver Edge.
Indeed, the body sees these uncommonly small colloidal
silver micro-particles as “nutrients” (which they are) and utilizes them accordingly, sending them into the cells,
tissues and organs, and afterwards expelling them just as it would any other
nutrient once it’s been utilized.
The FDA Agrees
Believe it or not, the FDA’s own studies have documented the
fact that larger silver particles are more difficult
for the body to absorb, distribute and utilize, while smaller silver particles
are much easier for the body to
absorb, distribute and utilize.
In fact, according to the FDA’s National Center for
Toxicological Research Annual Report for 2011, in animal studies they
conducted, there was only limited
absorption of silver particles when they were relatively large.
However, as the silver particle size decreased, absorption
increased proportionately. According
to the FDA report:
“Silver nanoparticles are highly
effective antibacterial agents, and this property of silver nanoparticles is
being exploited in an expanding number of commercial and consumer products…
…During fiscal year 2011, Division
investigators examined the effect of the size of silver nanoparticles on the bioavailability,
tissue distribution, metabolism, and clearance in rats.
The results indicated that, after
oral administration, only limited absorption occurs, with the extent of
absorption increasing as the size of the [silver] particles decreased.”
-- FDA National Center for Toxicological Research Annual Report, 2011,
page 19
So according to the FDA, “bioavailability, tissue
distribution, metabolism, and clearance” of silver particles is almost
completely dependent upon…drum roll, please…small
particle size.
In other words, the FDA has demonstrated that smaller silver
particles are more easily absorbed,
distributed throughout the body, utilized and afterwards eliminated. But larger silver particles are less easily absorbed, distributed,
utilized and eliminated.
So obviously, for maximum bioavailability you want the smallest sized silver particles possible.
That’s what makes the Micro-Particle Colloidal Silver
Generator so uniquely valuable and beneficial compared to other colloidal
silver generators – it produces silver particles as low as .8 nm, meaning a
fraction of a single nanometer.
These are uncommonly small silver particles you just can’t
produce with any conventional colloidal silver generator on the market today!
Smaller Silver
Particles
Are Far More Effective, Too!
What’s more, in addition to smaller silver particles being far
more bioavailable, numerous clinical studies have demonstrated they’re also far
more effective against disease-causing
pathogens such as viruses, “stealth bacteria” like mycoplasmas, and
antibiotic-resistant bacteria like MRSA.
For example, researchers behind the famous HIV study,
published in the prestigious journal Nanobiotechnology, found that silver particles larger than 10 nm in size were unable to
effectively bond with the host cell of the AIDS virus and disrupt its ability
to replicate.
But silver particles smaller
than 10 nm had no problem at all
bonding with the host cell, and preventing the AIDS virus from replicating and
spreading!
Researchers in Czechoslovakia later demonstrated that silver
particles above 25 nm in size were not able to effectively kill the deadly MRSA
pathogen, whereas silver particles smaller than 25 nm killed this pathogen
handily.
And Dr. Darryl See, M.D., former co-director of the Chronic
Fatigue Syndrome and Fibromyalgia Clinic at the University of California at
Irvine found that his patients suffering from “incurable” chronic degenerative diseases
caused by underlying mycoplasmas infections
experienced dramatic improvement from colloidal silver…
…but only if the particle size was small enough to penetrate
deep into the cells and tissues of the human body where these insidious
“stealth pathogens” are known to hide. (See Arthritis and
Infections: The Hidden Link, Health Sciences Institute, Vol. 2, #10, April
1998.)
So experts agree that silver particle size is extremely important, both if you want to
achieve maximum bioavailability of
the ingested silver particles, as well as maximum bio-effectiveness against difficult-to-eradicate disease-causing pathogens.
In short, the tiny, submicroscopic size of the silver
particles is what makes the colloidal silver solutions produced by the best-selling
Micro-Particle Colloidal Silver Generator far
superior to colloidal silver solutions produced by conventional generators.
The Speed v/s Quality
Difference
Most colloidal silver generator manufacturers believe their
customers want speedy batches of
colloidal silver.
That’s why they almost universally manufacture colloidal
silver generators that produce batches of colloidal silver in half-an-hour to
an hour or so.
Unfortunately, to accomplish this they have to use excessively
high electrical currents that quickly “blow” silver particles off the silver
electrodes.
In doing so, they sacrifice quality and small particle size in favor of production speed. Indeed, as you’ve
already seen in the above laboratory micrographs, the result of speedy batches is
inevitably the production of grossly overly-large silver particles.
But by making your own colloidal silver with a high-quality
Micro-Particle Colloidal Silver Generator from The Silver Edge, the tiny silver
micro-particles trickle slowly and gently
off the silver electrodes over a period of three
hours.
They’re never “blown” quickly off of the electrodes by
excessive electrical current, as occurs with most conventional colloidal silver
generators.
And because the silver particles are so small, and each one
carries its own singular electrical charge, there’s virtually zero agglomeration (i.e., bonding of
silver particles into “blobs” or “clumps”).
Over the course of three hours, literally billions of these tiny, submicroscopic
silver micro-particles are produced in a typical one-quart batch, giving you
one of the most high-quality colloidal silver solutions that can be made
through any process, anywhere in the world!
You may have to wait a little bit longer to make a batch of high-quality
micro-particle colloidal silver (i.e., three hours for a full, one-quart batch),
but you get the most bio-available
and bio-effective colloidal silver
possible.
One More Crucial
(and Mind-Blowing)
Benefit…
Unlike any other colloidal silver generator on the market
today, the Micro-Particle Colloidal Silver Generator includes a built-in air bubbler
mechanism that constantly bubbles air into the colloidal silver solution during
the entire colloidal silver-making process.
Here’s why: Among its
many qualities, silver is known to be an oxygen
sponge. It has the capacity to carry ten
times its atomic weight in molecular oxygen.
This is crucial to understand, because once enough molecular
oxygen is concentrated onto the surface of a silver particle through a process
known as oxygen adsorption, it’s then converted to nascent oxygen.
Nascent oxygen, in turn, is able to destroy the enzymes all infectious
microorganisms depend upon for catalytic function. In other words, by destroying these enzymes,
the pathogen’s ability to function collapses.
This process is called catalytic
oxidation, and it’s similar to the way hydrogen peroxide kills pathogens. After a pathogen is struck by a burst of
nascent oxygen from a nearby silver particle, its function is quite literally crippled,
and soon afterwards it expires.
Indeed, catalytic oxidation is the first of three known mechanisms utilized by
silver to kill infectious microorganisms.
Here are the three:
1.) Catalytic
oxidation – a powerful burst of nascent oxygen from the surface of the
silver particle stuns and disables the pathogen’s defenses, removing needed
hydrogen atoms from the surface membrane and causing sulfur atoms to bond in
such a way that respiration is blocked and the pathogen ultimately expires.
2.) Reaction
with the cell membrane – if the pathogen remains alive in spite of the intense
damage caused by the oxygen burst, the silver ions themselves then attach to
the surface membrane of the pathogen, further impairing cellular respiration
and blocking its energy transfer system so repair cannot take place.
3.) Binding
with the DNA – The silver then penetrates the cell wall of the pathogen and
binds to its DNA, further preventing it from replicating and spreading throughout
the body.
It’s this “one-two-three punch” that makes colloidal silver
so effective against infectious microorganisms of every sort, whether
bacterial, viral or fungal. The first
mechanism above does the vast majority
of the damage to pathogens, while the second and third mechanism help “mop up”
anything that’s survived.
But here’s the key: In
order to obtain the benefits of silver’s first
and primary mechanism for defeating infectious
microorganisms – i.e., catalytic oxidation -- you have to provide ample air to the silver particles during the course
of the colloidal silver-making process.
Otherwise, your silver particles cannot concentrate
molecular oxygen onto their surfaces, convert it to nascent oxygen in
sufficient quantities, and then release a crippling “oxygen burst” in the
presence of pathogens.
As much as 50% or more of colloidal silver’s
effectiveness against pathogens depends upon this process of catalytic
oxidation. In other words, it depends
upon the amount of molecular oxygen each silver particle is able to adsorb and
concentrate to its surface, and then convert to nascent oxygen for later use
against pathogens.
That’s why the Micro-Particle Colloidal Silver Generator –
unlike any other colloidal silver generator on the planet – includes a built-in
bubbler system (see image below) so that every one of the tens of billions of tiny
silver micro-particles produced during a typical batch are charged to the hilt with raw molecular oxygen.
This one factor alone means the Micro-Particle Colloidal
Silver Generator is able to produce colloidal silver that’s at least 50% more effective than the colloidal silver
produced by conventional colloidal silver generators.
Combine that with the profound benefits of being able to
produce uncommonly small and highly bioavailable and bio-effective submicroscopic
silver particles as low as .8 nm, and you quite literally have the ability to produce
some of the most high-quality colloidal silver on the planet any time you need it!
Unbelievable Ease of
Operation
If you’re concerned about ease of operation, have no
fear. The Micro-Particle Colloidal
Silver Generator is purposely constructed for ease of operation.
In fact, if you can use a coffee pot, you can easily use a
Micro-Particle Colloidal Silver Generator.
That’s because, unlike conventional colloidal silver
generators, there are no complicated dials and buttons to set. No switches to throw. No alligator clips to connect. No electrical wires running all over the
place. Nothing.
You just plug the two silver rods into their jacks in the
bottom of the generator box (which takes about two seconds), set the generator box
on top of a one-quart glass jar filled with pure, steam-distilled water, and plug
it in to a standard electrical outlet.
It’s that easy.
And if you want to use the handy wall-timer that’s included
with every Micro-Particle Colloidal Silver Generator (see photo), you can just
“set it and forget it.” You don’t even
have to be there when your batch of colloidal silver is finished “brewing.” It will turn off by itself after three hours
of running time, and be there for you when you return.
We have 80-plus year old grandmas using this generator, and
they all love it. In fact, the grown
daughter of one 86-year old Micro-Particle Colloidal Silver Generator owner
recently wrote us to say:
“I’m
writing this for my mother who’s 86 years old and has no computer and wanted me
to let you know the following:
She would not think of giving up her Micro-Particle Colloidal Silver
Generator or her colloidal silver.
Mom
wanted you to know that she used to get pneumonia at least twice a year until
she began using this colloidal silver. She has not had any sign of pneumonia in
five years and no problems with her health.
She also uses it as a disinfectant throughout the house. She uses it as a mouth
wash. She has had no sinus problems this year since she uses it as nose drops
(Oklahoma is notorious for allergies and sinus problems!)
Many of our church members are now asking Mom for a bottle of colloidal silver for
their families, and they ask again when they run out, so Mom tries to keep plenty
of it made up and on hand at a moment’s notice. She considers this as
something she can do to help others when they have a need and always gives it
to them as a gift.”
-- N.O., Oklahoma
The Bottom Line…
The bottom line is this:
If you truly value your health
and well-being, and only want to put the very best and most effective
colloidal silver possible into your body, then the new Micro-Particle Colloidal
Silver Generator from The Silver Edge is exactly what you’ve been looking for.
When quality counts most, this is the colloidal silver generator you want to own,
particularly when you consider the facts that:
a.) ultra-small silver particle
size is the key factor in determining whether or not your body can
absorb, distribute and utilize colloidal silver effectively for maximum health
and well-being, and...
b.) ultra-small silver particle
size is the key factor in determining whether or not the colloidal
silver you’ve ingested can get deep into the cells and tissues where
disease-causing “stealth pathogens” like to hide, and…
c.) ultra-small silver particle
size is the key factor in determining whether or not the colloidal
silver you ingest can be properly excreted from the body after being utilized.
In other words, the particle
size of the colloidal silver solutions you produce largely determines how bio-available the silver is, and
therefore how bio-effective it will
be in stopping infections and healing illnesses and disease.
The Micro-Particle Colloidal Silver Generator from The
Silver Edge allows you to produce the smallest and most effective silver
particles possible, as low as .8 nm in size – a fraction of a single
nanometer!
And each silver particle produced is highly charged with
pathogen-destroying molecular oxygen. No
other colloidal silver generator can make this claim.
No Risk to You
Whatsoever!
Unlike many conventional colloidal silver generators which
are so poorly designed and which use such low-quality materials they “burn out”
from use within six or eight months, the new Micro-Particle Colloidal Silver
Generator has been designed and built to last for a LIFETIME.
It's so sturdily constructed, you'll literally end up
willing it to your children someday, if you don't buy them one first
after you’ve purchased your own! Indeed,
we have customers who have owned (and used) their Micro-Particle Colloidal
Silver Generators for over 15 years without a hitch!
What’s more, every new Micro-Particle Colloidal Silver Generator
comes with a full 30-day, no-questions-asked, “use-it-for-yourself and make-up-your-own-mind”
money-back guarantee, AND a one-year warranty against defects in parts and
workmanship.
So there's no risk to you whatsoever.
You actually get to use the new Micro-Particle Colloidal
Silver Generator every single day for
a full 30 days to prove it's everything we say it is.
Think About This: If you make a one-quart batch of high-quality micro-particle
colloidal silver each day during your 30-day risk-free money-back guarantee period,
you'll have 30 quarts of colloidal
silver stocked up!
That's the equivalent of 240 of those little 4-oz. bottles
of colloidal silver sold in your local health food store for between $20 and
$30 each!
In other words, you could make well over $4,800 (honest...do
the math!) worth of colloidal silver while deciding whether or not to keep your
new Micro-Particle Colloidal Silver Generator!
And if you're not satisfied for any reason, just return your generator, the timer, the silver wire
and the plastic zipper pouch carrying case within 30 days for a refund of the
full purchase price!
Save $100 By Acting
Now!
A brand new Micro-Particle Colloidal Silver Generator from
The Silver Edge usually costs $339.95, and I believe it’s a screaming bargain at that price, especially when you consider the
fact that your very first one-quart batch of micro-particle colloidal silver costs
you less than 36 cents to make.
In other words, your first few one-quart batches of
colloidal silver pays for the entire cost of your new generator, especially when
you consider the fact that those tiny little four-ounce bottles of colloidal
silver being sold in health food stores cost an average of $28 apiece.
Yet with your new Micro-Particle Colloidal Silver Generator
from The Silver Edge, you can make eight of those little four-ounce
bottles (i.e., one quart) at a time, for less than the cost of pocket change.
What’s more, once your first few batches have paid for the
entire cost of your generator, each subsequent one-quart batch you make is
practically free.
After all, your only cost is the steam-distilled water
(about a dollar a gallon at Walmart), and the pure .999 fine silver wire which
has to be replaced about once a year for around $35 (depending upon the cost of
silver on the open market).
So $339.95 is not only a fair price, but an astonishing bargain
considering the fact that you’ll be able to make hundreds upon hundreds of
one-quart batches of some of the highest-quality colloidal silver in the world for just pennies per batch.
But you’re not going to pay anywhere near $339.95 for your
new Micro-Particle Colloidal Silver Generator.
That’s because, for the next 15
days only you’ll save a whopping $100 of the regular price.
That’s right! For the
next 15 days only, during this special introductory savings offer, you can snag
a brand new Micro-Particle Colloidal Silver Generator for only $239.95 – that’s a
bona-fide savings of $100!
Lots of Other
Valuable Goodies!
Plus, along with your new generator and the $100 savings, you’ll
also receive a 16-page printed Operating Instructions Guide with simple
step-by-step instructions, and loads of handy tips for making, storing and using
colloidal silver.
AND, in case you’re one of those people who prefer visual instructions from a real-life
person, you’ll also receive a full-color Operating Instructions DVD featuring a
pretty model demonstrating step-by-step how simple it is to make your first
batch of micro-particle colloidal silver with your new Micro-Particle Colloidal
Silver Generator.
But that’s not all.
You also get a FREE copy of my 16 page report, “The Most Frequently
Asked Questions & Answers About Making and Using Colloidal Silver,” so you’ll
be up-to-speed your very first day.
You also get a FREE handy “zipper pouch” carrying case so
you can easily take your new generator and supplies with you wherever you
go…vacations, camping, travel, and more.
And finally, you get a set of pure, .999 fine silver wire for
your generator, guaranteed to last you for over a year (even if you make
colloidal silver several times a week).
Indeed, you’ll be able to make well over $24,000 worth of
high-quality micro-particle colloidal silver from this single set of pure .999
fine silver wire, which is to say, over 3,200 ounces which is over 100 quarts! (See this web page for more
information.)
It’s astonishing, I know, but it’s absolutely true.
Your ability to make literally tens of thousands of dollars
worth of colloidal silver from a single set of pure, .999 fine silver wire is one
of the many profound benefits of owning a new Micro-Particle Colloidal Silver
Generator from The Silver Edge!
Order Now and Save
BIG!
To order a brand new Micro-Particle Colloidal Silver
Generator and save $100 off the regular price (next 15 days only!), use
the “Order Online” button on this
web page.
Or call The Silver Edge today, toll-free at: 1-888-528-0559
(Monday through Friday, 8am to 5pm, Arizona time.)
Our friendly Customer Service Representatives will be happy
to answer all of your questions and take your order. And once you place your order, your brand new
Micro-Particle Colloidal Silver Generator will usually arrive within a week!
There’s simply no longer any reason to continue paying $25
to $30 for those tiny, four-ounce bottles of colloidal silver sold through
health food stores or online vendors.
Instead, start experiencing the profound benefits of being
able to make your own high-quality, oxygen-infused, micro-particle colloidal silver
for less than 36 cents a quart with
the world’s #1 best-selling colloidal silver generator!
You’ll be glad you did, I promise…
Yours for the safe, sane and responsible
use of colloidal silver,
P.S. – One Final Thought…It’s important to note that The
Silver Edge is not some fly-by-night internet company. We're a solid company
with over 16 years behind us of successful service to the public, supplying the
world's finest home colloidal silver generators.
We have a full-time Tech Support staff you can call during
normal business hours whenever you might have a question. And we have a full-time Customer Service
staff you can call anytime you need, as well (i.e., Monday through Friday,
during normal business hours, for both).
And if you prefer to communicate by email, we also give you
the email address to both the Tech Support Department and the Customer Service
Department.
And this contact information is printed on a big foil
label right on the top of your new Micro-Particle Colloidal Silver Generator,
so you’ll never lose it.
This means you’re never
left in the dark when you own a new Micro-Particle Colloidal Silver Generator
from The Silver Edge. You’ll always have
access to the experts at The Silver Edge.
In short, we've been around for a long time, and we plan to
be around for a lot longer.
The Silver Edge is a company you can trust, and the new
Micro-Particle Colloidal Silver Generator is simply the finest and most
high-quality colloidal silver generator on the market today...
...which is why it's been the #1 best-selling colloidal
silver generator in the world for
over seven years running.
P.P.S. -- Read What These Top Experts Say About the Micro-Particle
Colloidal Silver Generator from The Silver Edge:
“I'm
often asked which colloidal silver generator I recommend. Hands down, I
recommend the Micro-Particle Colloidal Silver Generator from my friend Steve
Barwick at Silver Edge…
I've
touted the benefits of pure micro-particle colloidal silver for years to anyone
that would listen.
Frankly,
it's the best way I know to quickly heal cuts, scrapes, sores and burns...
treat a host of common illnesses such as colds, flus and sore throats... as
well as kill nasty germs on cutting boards, kitchen counters, tooth brushes and
even your pet's water bowl.
But
most importantly is how it can protect you from the deadly pathogen MRSA that
has become resistant to almost all known prescription antibiotics.
Having
a colloidal silver generator as part of your first aid kit just makes sense...
especially if you ever find yourself in an emergency with no access to a doctor
or hospital.”
-- Michael Cutler, M.D.,
Editor, Easy Health Options
“The
bottom line is that for colloidal silver to effectively fight pathogens, you
must use micro-particle silver rather than conventional colloidal silver or
silver protein products…
You
can actually make your own micro-particle colloidal silver in your own home. In
fact, there’s one colloidal silver generator on the market today -- the
Micro-Particle Colloidal Silver Generator from a company called The Silver Edge
-- that will make colloidal silver with such uncommonly small silver particles,
it requires a multi-million dollar Transmission Electron Microscope operating
at 175,000x magnification just to see them.
This
generator allows you to make the most powerful, and highly bioavailable form of
colloidal silver right in your own home. And you can make it for pennies…
Having
a Micro-Particle Colloidal Silver Generator on hand allows you to protect your
entire family – and probably your friends and neighbors as well – for just
pennies.”
-- Donald S. McAlvany, The
McAlvany Intelligence Advisor, October 2013
Important Note and
Disclaimer: The contents of this Ezine have not been
evaluated by the Food and Drug Administration.
Information conveyed herein is from sources deemed to be accurate and
reliable, but no guarantee can be made in regards to the accuracy and
reliability thereof. The author, Steve
Barwick, is a natural health journalist with over 30 years of experience
writing professionally about natural health topics. He is not
a doctor. Therefore, nothing stated in
this Ezine should be construed as prescriptive in nature, nor is any part of
this Ezine meant to be considered a substitute for professional medical
advice. Nothing reported herein is
intended to diagnose, treat, cure or prevent any disease. The author is simply reporting in
journalistic fashion what he has learned during the past 17 years of journalistic
research into colloidal silver and its usage.
Therefore, the information and data presented should be considered for
informational purposes only, and approached with caution. Readers should verify for themselves, and to
their own satisfaction, from other knowledgeable sources such as their doctor, the
accuracy and reliability of all reports, ideas, conclusions, comments and
opinions stated herein. All important
health care decisions should be made under the guidance and direction of a
legitimate, knowledgeable and experienced health care professional. Readers are solely responsible for their
choices. The author and publisher
disclaim responsibility and/or liability for any loss or hardship that may be
incurred as a result of the use or application of any information included in
this Ezine.
Copyright
2014 | Life & Health Research Group, LLC | PO Box 1239 | Peoria AZ
85380-1239 | All rights reserved.
Posts
